feeding distance
feeding distance是什么意思、feeding distance怎么读
读音：[ˈfiːdɪŋ ˈdɪstəns]
[ˈfiːdɪŋ ˈdɪstəns]
feeding distance 基本解释
进给距离；补给距离
重点词汇
feeding distance 双语例句
- 1、
A wild goat had passed before the mouth of the cave, and was feeding at a little distance.
原来是一只野山羊奔过了岩石，下在不远处吃草。 - 2、
We decided to track alongside some seals which were coming back to the island after feeding out at sea, keeping a distance so as not to interfere.
我们决定，跟着一些在海里觅完食返回岛屿的海豹，保持一段距离，以免干扰。 - 3、
Roller abb feeding with adjustable coil distance, suitable for all kinds wefts especially the weaving of fabrics with strong twisting yarn.
罗拉式储纬，纱圈之间的间距可调节，适应各种纬纱特别是强捻纱的面料织造。 - 4、
By variance analysis, it was concluded that the breaking strength and elongation at break of composite yarn increase with increasing of twist, but little dependence on the feeding distance;
通过对实验结果进行方差分析发现，在实验范围内，复合纱成纱强度和断裂伸长率均随纺纱捻度的增加而增加，但纺纱两组分喂入间距对其影响不大； - 5、
No significant effect is observed on the composite yarn evenness by the twist and feeding distance;
成纱捻度和两组分喂入间距对成纱的条干不匀CV值影响不显著； - 6、
This welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.
全位置自动焊接技术的特点是，焊丝可以连续送进，焊丝熔敷速度快，焊接质量较高，尤其适用于大口径、厚壁管的焊接。 - 7、
And the hairiness of composite yarn lessenes with the increasing of both twist and feeding distance.
复合纱的毛羽指数随成纱捻度及两组分在前罗拉处喂入间距的增加均呈现下降趋势。 - 8、
The capability of arc spraying was mainly affected by six factors, these are spraying current, spraying voltage, Wire feeding speed, gas Pressure, spraying distance and spraying material.
电弧喷涂工艺参数主要包括喷涂电流、喷涂空气压力、送丝速度、喷涂电压、喷涂距离和喷涂材料成分等。 - 9、
Therefore, the focus of this experimental study is that the affect of the size of pressure on the riser feeding distance.
因此，压力的大小对冒口有效补缩距离的影响也是本文实验研究的重点。 - 10、
At present, a great number of feeding systems for the small roller mill are pneumatic servo-control system in China. And the control method of the distance regulation of the roller mill is manual adjustment.
目前，我国的小型磨粉机喂料系统多数为气动伺服控制喂料系统，轧距的调节采用的是手动机械式调节机构，控制方式较为落后。 - 11、
Feeding roost density decreased with increasing distance from the parent, but no correlation between distance and seed deposition.
进食地密度随着离母树距离的增加而降低，距母树的距离与传播种子的数量没有相关关系。