butyl rubber
butyl rubber是什么意思、butyl rubber怎么读
读音：[ˈbjuːtɪl ˈrʌbə(r)]
[ˈbjutəl ˈrʌbər]
butyl rubber 基本解释
丁基橡胶；异丁（烯）橡胶
重点词汇
butyl rubber 双语例句
- 1、
Silicones and urethanes are by far the leading sealant products followed by latex and butyl rubber.
到目前为止密封剂产品主要是硅树脂和聚氨酯橡胶，其次是乳胶和丁基橡胶。 - 2、
Sulphur and compounds made from this process: i.e.Latex gloves, neoprene and butyl rubber.
制造过程中产生的硫及其化合物，如：橡胶手套、氯丁橡胶和丁基橡胶。 - 3、
The tall profile cone surrounds are of butyl rubber to allow greater excursion, and therefore higher output.
高轮廓的音盆环绕设备采用丁基橡胶以允许更大偏差，因而产生更大输出。 - 4、
Real-time Measurement of Secondary Organic Aerosol Formation from Photooxidation Toluene and Cl Atoms Study of Effect of Medicinal Chlorinated butyl rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
甲苯与氯原子光氧化产生二次有机气溶胶粒子实时探测研究药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响 - 5、
Effects of pH value after neutralization on structure and properties of brominated butyl rubber
中和反应后pH值对溴化丁基橡胶结构与性能的影响 - 6、
Methods To summarize the application of butyl rubber in our preparation department in the last three years.
对三年来我院制剂室丁基胶塞的使用情况进行总结。 - 7、
The adhesive elastic material layer arranged between the restricting layer and the thermo-cured reinforcing layer is made of butyl rubber.
在约束层和热固化加强层之间有丁基胶的粘弹性材料层。 - 8、
Application of Membrane Separation Technology for Ethylene Recovery Process in butyl rubber Synthetic Plant
膜分离技术在丁基装置乙烯回收工艺中的应用 - 9、
Effect of viscoelasticity and shape of butyl rubber seal rings on structural sealing performance
丁基橡胶密封环形状和材料黏弹性对结构密封性能的影响 - 10、
Study of Effect of Medicinal Chlorinated butyl rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响 - 11、
RESULTS: The particulate matter increased obviously. Study of Effect of Medicinal Chlorinated butyl rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
结果：配伍溶液中不溶性微粒数量明显增多，应引起重视。药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响 - 12、
The Technology and Manufacture of butyl rubber on Home and abroad
丁基橡胶的国内外技术现状及生产情况分析 - 13、
This type of sealant mainly butyl rubber, high molecular weight polyisobutylene, a certain degree of polymerization of acrylic, chlorosulfonated polyethylene and neoprene rubber sealant.
这一类密封胶主要有丁基橡胶、高分子量聚异丁烯、一定聚合程度的丙烯酸酯、氯磺化聚乙烯以及氯丁橡胶等密封胶。 - 14、
An extruded self adhesive tape for lap seam of EPDM sheet has brominated butyl rubber as main ingredient and appropriate aids.
介绍了一种以溴化丁基橡胶为主体材料，加入适当的化学助剂，经挤出成型的三元乙丙橡胶高分子片材搭接缝用自粘胶带。 - 15、
Properties and Development of butyl rubber and Halogenated butyl rubber
丁基与卤化丁基橡胶的性能用途及研发 - 16、
Study on the Liquefied Natural Gas Cold Energy Used for Synthesis of butyl rubber
液化天然气冷能为丁基橡胶合成提供冷量研究 - 17、
The compound butyl rubber is calendered.
将混制成的丁基橡胶进行精压。 - 18、
Damping Properties of Silicone Rubber and butyl rubber Blends
硅橡胶和丁基橡胶共混体系的阻尼特性研究 - 19、
The main materials we used are including silicone rubber, fluorubber, natural rubber, neoprene rubber, EPDM, butyl rubber, polyurethane, polyethylene, EVA, ABS, PP, and PVC.
使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。 - 20、
OBJECTIVE To investigate the effect of butyl rubber stopper on the stability of procaine hydrochloride injection.
目的研究丁基橡胶塞对普鲁卡因注射液稳定性的影响。 - 21、
Studies and application of reclaimed butyl rubber by radiation
辐射再生丁基橡胶的研究和应用 - 22、
This paper describes the manufacture of modified chloride butyl rubber adhesive with the influences and functions of resins, metal oxides and solvents on adhesive strength investigated.
主要研究了改性氯丁胶粘剂的制备，讨论了树脂、金属氧化物、溶剂对胶粘剂粘接强度的影响和作用。 - 23、
A study was made on the properties of reclaimed butyl rubber ( RIIR) blends with non-polar unsaturated rubber.
对再生丁基橡胶（RIIR）与非极性不饱和橡胶共混物的性能进行了研究。 - 24、
In this paper, absorbed dose, dose rate, and pretreatment methods on properties of reclaimed butyl rubber are studied.
本文研究了吸收剂量，剂量率和预处理方法对再生丁基胶物理性能的影响。 - 25、
The preparing process and the characteristics of the domestic BS-8 type butyl rubber sealant were introduced.
介绍了制备工艺及国产BS-8型丁基密封胶的性能特点。 - 26、
Study on Chloro sulfonated Polyethylene Modified by butyl rubber
丁基橡胶对氯磺化聚乙烯改性的研究 - 27、
METHODS Halogenated butyl rubber stopper for injection was researched on different temperatures.
方法对注射液用卤化丁基橡胶塞在不同的温度下进行试验。 - 28、
In this paper, sulfur-cured butyl rubber(ⅱ R) was devulcanized by using supercritical CO2.
本文利用超临界二氧化碳流体对硫磺硫化的丁基橡胶进行脱硫再生研究。 - 29、
High purity isobutene ( HPI) is an important monomer in polymerization process of butyl rubber.
高纯度异丁烯是聚合生产丁基橡胶的重要单体。
butyl rubber 英英释义
noun
- synthetic rubber made by polymerizing isobutylene