clad metal

clad metal 基本解释

网络  包层金属; 复合金属板; 复合金属

化学

重点词汇

• metaln. 金属, 金属制品, 合金, 本质, 质料 a. 金属制的 vt. 以金属覆盖
• cladvt. 在金属外包上另一种金属 a. 包层金属的 clothe的过去式和过去分词

clad metal 双语例句

1. 1、 Gold ( excl. gold clad with precious metal) cutting
   黄金（不包括用贵金属包层的黄金）切片
2. 2、 To split into thin layers or sheets. gold ( excl. gold clad with precious metal) cutting
   分成薄片切成细小的薄层或薄片黄金（不包括用贵金属包层的黄金）切片
3. 3、 Design of a new vacuum Compton gamma-ray detector with clad metal electron-converter plate GaAs double-heterostructure photodetector
   复合金属发射极真空康普顿探测器结构设计砷化镓双异质结构光探测器
4. 4、 Research on Plasma Arc Forming of Laminated clad metal Sheets Containing Defects
   含缺陷层状金属复合板等离子体弧柔性成形研究
5. 5、 Articles of goldsmiths'or silversmiths'wares and parts thereof, of precious metal or of metal clad with precious metal.
   贵金属或包贵金属制的金银器及其零件。
6. 6、 Other articles of precious metal or of metal clad with precious metal.
   贵金属或包贵金属的其他制品。
7. 7、 It just uses compressed air source with a low cutting cost and can cut stainless steel, copper, aluminum, cast steel, carbon steel, clad metal and other metals.
   它仅用压缩空气源，切割成本低廉，可切割不锈钢、铜、铝、铸钢、碳钢、复合金属等金属材料。
8. 8、 The situation of strengthened boiling heat transfer of perforated surface for clad metal wire mesh was mentioned.
   综述了复合金属丝网多孔表面的强化沸腾传热现状。
9. 9、 Film Coating of Paracetamol, Loratadine and Pseudoephedrine Sulfate Sustained Release Tablets; gold ( excl. gold clad with precious metal) cutting
   氨酚氯雷伪麻缓释片的薄膜包衣工艺黄金（不包括用贵金属包层的黄金）切片
10. 10、 Jewellery arts ( excl. watch cases) containing precious metal or metal clad with precious metal to an extent exceeding minor constituents
    珠宝首饰配件（不包括表盒）所含贵金属或包有贵金属的金属不再属于次要成份
11. 11、 Determination or Yield Stress of clad metal Wire
    金属复合线材屈服应力的确定
12. 12、 The clad metal sheet has been produced by a proprietary roll bonding process.
    这种金属复合板是采用特殊的轧制复合工艺加工而成的。
13. 13、 Technology of clad metal Production and Its Latest Progress
    层状金属复合材料生产工艺及其新进展
14. 14、 Al/ Ni clad composite metal is widely applied as the external terminal of battery under the demands of both high bonding strength and low hardness of nickel layer.
    广泛应用于电池极耳的铝/镍层状复合金属材料，性能要求在保证复合强度的同时，必须控制镍层显微硬度在较低值范围。
15. 15、 New development of technology of clad metal
    金属层状复合技术及其新进展
16. 16、 The continuous rolling casting and continuous casting with electromagnetic field are potential processing to manufacture clad metal, which can simplify the techniques and overcome oxidations between two layers to fasten the combination of the interfaces.
    其中铸造与轧制相结合、铸造过程施加电磁场的复合方法，可以使生产工艺简化，避免复层界面之间的氧化，使界面之间的结合比较牢固，是一种具有发展潜力的复合工艺。
17. 17、 The Process for clad metal of Al-Si and Al-Mg under Direct Electromagnetic Field
    直流电磁场下铝硅-铝镁复层材料的制备
18. 18、 A Study on the Fracture Behaviour of Explosive clad metal
    爆炸焊复合材料断裂行为的研究
19. 19、 Review in Research and Development of clad metal Sheets
    金属层状复合材料的研究状况与展望
20. 20、 Sichuan Yibin clad metal Sheet Plant
    四川省宜宾金属复合板厂
21. 21、 Manufacture of Electric and Elasticity clad metal Replacing Beryllium-Copper Alloy
    代铍铜导电弹性复合金属材料的研制
22. 22、 Study on Microstructure and Property of Fe-Al Alloy clad metal
    Fe-Al合金堆焊层的组织和性能研究
23. 23、 Application Study on Ultrasonic Cleaning Used in Noble/ Base clad metal Production
    超声波清洗在贵/廉金属复合材料生产过程的应用研究
24. 24、 The results of a study of commercial pure ( C P) titanium brazing with Al-Ti-Al clad metal sheet are presented.
    介绍了用Al－Ti－Al合金金属复合板钎焊工业纯钛的研究结果。
25. 25、 Research development of surface strengthened boiling heat transfer for clad metal wire mesh
    复合金属丝网表面强化沸腾传热的研究进展
26. 26、 Study of Titanium Brazing with Al-Ti-Al clad metal Sheet
    用Al-Ti-Al合金钎料复合板钎焊钛的研究
27. 27、 The effects of CeO 2 on structure and corrosion resistance of laser clad Ni based metal ceramic coatings were investigated. The studies revealed that CeO 2 could accelerate the dissolution of tungsten carbide particles and made the formation of Cr W inter
    研究了稀土氧化物CeO2对激光熔覆金属陶瓷复合层显微组织形态和耐腐蚀性能的影响，发现稀土氧化物CeO2能加速碳化钨颗粒的溶解，促使钨与铬形成金属间化合物；
28. 28、 Behaviour of Ceramic Particles in Laser clad metal/ Ceramics Composite Coatings
    激光熔覆金属/陶瓷复合涂层中陶瓷相的行为
29. 29、 On the Optimization of Experimental Parameters and the Structural Properties of Laser clad metal Ceramics
    金属陶瓷激光熔覆处理的工艺参数和组织性能优化
30. 30、 clad metal is a new type of material which is prepared by advanced composite technology with two different alloys, and its performance is very good.
    层状金属复合材料是利用先进复合技术将两种或两种以上物理、化学和力学性能不同的合金在界面上实现牢固结合而制备的一种新型复合材料，具有很好的综合性能。