semi-finishing
semi-finishing是什么意思、semi-finishing怎么读
读音：[ˈsemi ˈfɪnɪʃɪŋ]
[ˈsemi ˈfɪnɪʃɪŋ]
semi-finishing 基本解释
网络 半精加工
重点词汇
semi-finishing 双语例句
- 1、
The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.
用于铸铁和有色金属精加工和半精加工，也用于锰钢和淬火钢的加工。 - 2、
The procedures are chamfering both sides of the gudgeon pin and crank pin core and semi-finishing the crank pin bore at a rate of1000 pieces per hour at100% efficiency.
加工工序是对活塞销孔和曲轴销孔的两侧端面倒角，并半精镗曲轴销孔，在负荷率100%时，生产率为每小时1000件。 - 3、
Optimizations to cement semi-finishing grinding system using roller press
辊压机水泥半终粉磨系统的优化措施 - 4、
semi-finishing grinding systems with roller press are used more and more in new-built PC production lines and cement grinding stations.
辊压机半终粉磨系统在新建干法水泥生产线及水泥粉磨站中，近年来逐渐被广泛采用。 - 5、
The advantages of coated cemented carbide tool in dry milling of high-strength steel are demonstrated, and the workpiece surface roughness reaches the level of semi-finishing grinding.
试验结果表明：涂层刀片干铣削高强度钢的加工性能优异，工件加工表面质量达到半精磨水平。 - 6、
The guidelines and methods for tool selections in cavity roughing, semi-finishing and finishing are proposed, and corresponding algorithms are developed accordingly.
研究了模具型腔工艺规划中的刀具选择问题，提出了模具型腔粗加工、半精加工、精加工刀具选择的原则与方法，并构造了相应的实现算法； - 7、
Grinding as an important processing method, its unique way of processing can make the surface reach a higher quality, so often used in semi-finishing and finishing.
磨削加工作为一种重要的加工方法，以其独特的方式可以使加工表面达到较高的质量，因此通常被用于半精加工与精加工环节。 - 8、
So the bronze-bonded wheels are mainly used for the machining of nonmetallic hard-brittle materials, and the coarse grinding, semi-finishing grinding, deep grinding and form grinding of cemented carbide.
因此，青铜砂轮主要用于非金属硬脆性材料的加工，也用于硬质合金的粗磨、半精磨、深磨、成型磨等。 - 9、
The traditional processing technology of integral impeller includes slotting, expanding, semi-finishing, finishing, surface inspection, abrasive fluid polishing and other methods. In these methods, rough machining is the most important factor affecting ma
整体叶轮数控铣削传统加工工艺一般包括流道开槽、扩槽、半精加工、精加工、表面检测与磨粒流抛光处理等一系列工艺环节，其中粗加工环节是影响加工效率的最重要的环节。 - 10、
The results show that the whirling process could simplify the process of rotors 'production, could reach the requirements of semi-finishing and improve the efficiency greatly.
结果表明，在现有条件下，用内旋风铣削能够简化螺杆生产工序，并达到螺杆半精加工要求，且大大提高生产效率。