metallurgical microscope
metallurgical microscope是什么意思、metallurgical microscope怎么读
读音：[ˌmetəˈlɜːdʒɪkl ˈmaɪkrəskəʊp]
[ˌmetlˈɜːrdʒɪkl ˈmaɪkrəskoʊp]
metallurgical microscope 基本解释
金相显微镜
重点词汇
- metallurgicala. 冶金的, 冶金学的 [机] 治金的, 治金术的
- microscopen. 显微镜 [化] 显微镜
metallurgical microscope 双语例句
- 1、
Metallography is the study of the microstructure of metals and alloys by means of the metallurgical microscope and the electron microscope.
金相学是用金相显微镜和电子显微镜对金属和合金的显微结构的研究。 - 2、
Large-type horizontal metallurgical microscope
大型卧式金相显微镜双筒型显微镜，眼科用 - 3、
The composition and structure of hot-dip aluminizing samples are analyzed by using metallurgical microscope, SEM and XRD.
采用金相显微镜、扫描电镜、X射线衍射等研究手段，检测分析了浸铝镀层的成分和组织结构。 - 4、
The failure analysis consisted of a strength analysis, a macro-fracture surface analysis, a metallurgical microscope and scanning electron microscope analysis.
分析包括结构强度分析、宏观断口分析、金相分析和扫描电镜分析等。 - 5、
Besides, the morphology and chemical structure of wheat straw and the chemical structure of SAR were confirmed by metallurgical microscope and IR spectra before and after the pretreatments.
用晶相显微镜、IR等表征了处理前后秸秆的微观形貌、化学结构及树脂的化学结构等； - 6、
The change of microstructure which the alloy was being heated was observed on high-temperature metallurgical microscope.
使用高温金相显微镜观察合金加热时的组织变化； - 7、
Using metallurgical microscope and SEM, the surface and cross-section of samples were observed.
借助金相显微镜和SEM，观察了膜层表面和断面的形貌。 - 8、
With the aid of scanning electron microscope, X-ray energy spectrum and metallurgical microscope, corrosion in the places of tubing fracture in Daqing oil fields has been observed.
利用扫描电镜、X射线能谱分析仪和金相显微镜，观察和分析了大庆油田破断油管断口各部位的腐蚀情况。 - 9、
Under the metallurgical microscope, itcan be ob-served that the coloring film is a colorless, transparent film.
在金相显微镜下观察到不锈钢着色膜为无色透明膜。 - 10、
Particles with different diameters in the latexes are observed under a metallurgical microscope.
在金相显微镜下观察了乳液中不同直径的粒子。 - 11、
The sealing interface between glass and Al2O3 Porcelain, or stainless or heat-resisting steel was investigated by means of metallurgical microscope and ion microprobe mass spectrometer.
本文通过金相显微镜、离子探针等手段，观察了一些玻璃与不锈钢、耐热钢或氧化铝瓷的封接界面。 - 12、
Application of Digital Photographic Technology in metallurgical microscope
数码照相技术在金相显微镜上的应用 - 13、
TIG welding process with TGS-309L super-low carbon austenitic stainless steel welding wire is used on the transitional layer of the weld of20/ 0Cr18Ni9 compound pipes. After welding, the welded joint is analyzed and researched by metallurgical microscope
采用TIG焊和超低碳奥氏体不锈钢焊丝TGS-309L焊接20/0Cr18Ni9复合管的过渡层焊缝，焊后利用金相显微镜和扫描电子显微镜对焊接接头进行了分析研究。 - 14、
The microstructure of laser-cladded layer was observed using metallurgical microscope and TEM. The phase compositions of laser-cladded layer were analysed using X-ray diffractometer.
用光学显微镜、透射电镜和X射线衍射仪进行显微组织观察与物相分析。 - 15、
The paper presents an study of copper clad steel wire produced by liquid and solid bonding method. The metallurgical structure at the Cu/ Fe interface area are observed with the optical microscope and the composition is tested by SEM with energy spectrum
以液固相复合法生产的铜包钢线为研究对象，利用光学显微镜和扫描电镜的能谱等手段分析了铜/钢界面区的组织形态和成分组成。 - 16、
The surface morphology was studied by metallurgical microscope. The films formed in H2O2 containing solution deposited faster, and the firms were loose.
用金相显微镜观察了铈转化膜的表面形貌，当H2O2浓度较高时，成膜速度较快，形成的膜层较为疏松。 - 17、
The effect of electroplating process parameters on composite coating morphology and structure are studied using nickel-sulfamic-acid as mail salt, and the composite coating is characterized by metallurgical microscope, XRD and SEM.
选取氨基磺酸镍镀液作为基础镀液，研究电镀工艺规范参数对Ni-SiC复合镀层形态与结构的影响，并通过金相显微镜、XRD及SEM对复合镀层进行表征分析。 - 18、
By using the metallurgical microscope, the lamellar structure with different orientation was found. With change of pulling velocity, the orientation of lamellar structure was different.
利用金相显微镜观察到微观组织由位向不同片层团组成，随抽拉速度不同，片层位向也有所不同。 - 19、
Ni-CMS composite coating is characterized by metallurgical microscope, XRD and SEM. Based on that, the effect of plating technology parameters on morphology and structure of Ni-CMS self-lubricating compound coating are studied.
通过金相显微镜、XRD及SEM对镍-碳微球复合镀膜进行表征分析，研究电镀工艺参数对镍-碳微球复合镀层形态与结构的影响。