intermetallic phases

intermetallic phases 基本解释

网络  金属间相

化学

重点词汇

• phasesn.阶段;时期;月相;(月亮的)盈亏v.分阶段进行;逐步做phase的第三人称单数和复数

intermetallic phases 双语例句

1. 1、 It is illustrated with examples that the oxidation-resistant and fracture toughness of Mo-Si-B alloys are much better than that of Mo or MoSi_2.It is indicated that the properties of multiphase Mo-Si-B alloy could be varied with their intermetallic phases
   阐述了Mo-Si-B微观结构对多相Mo-Si-B合金性能的影响，举例说明了多相Mo-Si-B合金的抗氧化性及断裂韧性比钼或钼的硅化物有明显提高。
2. 2、 intermetallic phases and microstructures of a rapidly solidified Al94Ti4C2 ( at%) alloy have been investigated.
   研究了快速凝固Al94Ti4C2（at%）合金的显微组织和相结构特征。
3. 3、 Recent results about preparation and structure of Multiphase Mo-Si-B alloy are reviewed. It is indicated that the intermetallic phases in Mo-Si-B alloys could be varied with the compositions and fabricating technique.
   综述了多相Mo-Si-B合金制备和微观结构的研究进展，指出Mo-Si-B组分含量和制备工艺均影响多相Mo-Si-B合金的中微观组织组成相的种类与微观结构；
4. 4、 The dissolution of the intermetallic phases was studied and the function of solution strengthening in Al-Si-Cu-Mg casting alloys during solution heat treatment was analyzed.
   对固溶处理过程中铸造Al-Si-Cu-Mg合金析出相溶解过程进行了研究。
5. 5、 In the alloy layer there are intermetallic compound strengthening phases Al_3Ni and AlNi_3 etc.
   在激光作用下，合金层中形成包含Al3Ni、AlNi3等金属间化合物强化相。
6. 6、 Based on the data of element diffusion, formation heat of phases and their stabilities, we-analysed the element diffusion at the interface of a binary diffusion couple and the formation of intermetallic phases.
   根据元素扩散数据、相形成热和它们的稳定性，分析了二元扩散偶界面元素扩散和中间相的形成。
7. 7、 Formation of intermetallic phases in Al-rich Part of Ternary Alloy Systems Containing Transition Metals
   含过渡金属的富Al三元合金相的形成规律
8. 8、 To investigate the effect of an alternating magnetic field on the morphology and distribution of iron-containing intermetallic phases in Al-Fe alloy, the near eutectic Al-1.99% Fe alloy and hypoeutectic Al-0.90% Fe alloy were solidified at a cooling rate
   研究了交流磁场对Al-Fe合金中含铁相形态及分布的影响。
9. 9、 But the brittle intermetallic phases can be easily formed between magnesium and aluminum elements, which will deteriorate the joint performance.
   但镁、铝之间极易形成大量脆性的金属间化合物相，恶化接头性能，采用传统的焊接方法难以获得良好的接头性能。