chilled iron 基本解释
网络 激冷铸铁
重点词汇
chilled iron 双语例句
- 1、
Study of Structure Properties and Process Optimization of chilled iron Camshaft
激冷铸铁凸轮轴组织性能研究及铸造工艺优化 - 2、
Formation Mechanism and Prevention of "Black Line" in Section of Chilled Cast Iron Camshaft
激冷铸铁凸轮轴黑线的形成机理及对策 - 3、
Chilled cast iron roller, apply to rubber, plastics industry, the compatibility-aligning bearings, flexible durable.
冷硬铸铁辊筒,适用于橡胶、塑料工业、配装调心轴承,灵活耐用、省电、减少维修。 - 4、
Effect of Inoculation on Microstructure and Properties of chilled iron Camshaft
孕育处理对激冷铸铁凸轮轴组织性能的影响 - 5、
Effect of microstructure on thermal fatigue properties of infinite chilled cast iron roll materials
显微组织对无限冷硬铸铁轧辊热疲劳性能的影响 - 6、
The wear resistance of chilled cast iron cams with different graphite contents in the chilled layer were studied through wear contrast test.
采用磨损对比试验,研究了激冷层中不同石墨含量激冷铸铁凸轮之间的耐磨性关系。 - 7、
Prevention from Surficial Inclusions of Mill Rolls of Cr-Mo Infinity Chilled Ductile Iron
铬钼无限冷硬球铁轧辊辊面夹杂缺陷的防止 - 8、
Influence of Te and Nb on Structure and Properties of Chilled Cast Iron Roll
Te和Nb对冷硬铸铁轧辊组织和性能的影响 - 9、
Research on Friction and Wear Behaviour of chilled iron
激冷铸铁摩擦磨损性能的研究 - 10、
Reason and Prevention of Blow Hole Defects in chilled iron Camshaft
激冷铸铁凸轮轴气孔缺陷原因及防止 - 11、
The effect of Nb on structure at elevated temperature and phase transformation temperature of chilled cast iron was studied in this paper.
采用高温金相显微镜研究了含铌冷硬铸铁高温的金相组织,差热分析仪测定了铌对冷硬铸铁固态相变温度的影响。 - 12、
Application on Thermal Analysis Method in Melten Iron Control of chilled iron Camshaft
热分析法在冷激灰铸铁凸轮轴炉前铁液控制中的应用 - 13、
Chilled cast iron camshaft has less production procedure and energy consumption and lower costs.
冷硬铸铁凸轮轴具有生产工序少、能耗少、成本低的特点。 - 14、
In this paper, the main factors affecting the chill depth of chilled cast iron roll were discussed.
本文探讨了影响冷硬铸铁轧辊白口层深度的主要因素。 - 15、
Effect of Superheat on the Quality of Melt Iron and Microstructure of chilled iron Camshaft
过热对铁液质量和激冷铸铁凸轮轴组织的影响 - 16、
In the process of rough rolling, the alloy semisteel was chosen, and the unlimited chrome and molybdenum chilled iron roll material was used in the process of fine rolling.
在粗轧阶段选用了合金半钢材料轧辊,在精轧阶段选用了铬钼无限冷硬铸铁材料的轧辊。 - 17、
Research on tribology property of Si_3N_4 ceramic and chilled iron under oil-less lubrication
微量润滑条件下Si3N4陶瓷-白口铸铁的摩擦学性能研究 - 18、
Production and Application of Fully Chilled Cast Iron Camshaft with High Properties
高性能全激冷铸铁凸轮轴的生产和应用 - 19、
Foundry Technique and Control of Chilled Cast Iron Camshafts
冷硬铸铁凸轮轴铸造技术与控制 - 20、
Wear rate of Si_3N_4 ceramic rose with the increase of loads between Si_3N_4 ceramic and chilled iron while the effect of relative sliding speed on wear rate of Si_3N_4 ceramic is not as significant as that of load.
Si3N4陶瓷的磨损率随载荷的增大而增大,滑动速度对磨损率的影响要小于载荷对其的影响; - 21、
Effect of Graphite Content in Chilled Layer on Wear Resistance of Chilled Cast Iron Cams
激冷铸铁凸轮激冷层中的石墨对耐磨性的影响 - 22、
The influence of chemical composition and inoculation on the microstructure and properties of chilled ductile iron camshaft was investigated.
研究了化学成分和孕育处理对激冷球铁凸轮轴组织和性能的影响。 - 23、
Influence of Annealing Temperature on Structure and Properties of Infinitely Chilled Nodular Iron Rollers
退火处理对无限冷硬球铁轧辊组织和性能的影响 - 24、
Influence of Process Factors Stability on Quality of Chilled Cast Iron Camshaft
工艺因素稳定性对冷硬铸铁凸轮轴质量的影响 - 25、
Influence of Raw Material on Struture and Property of chilled iron Camshaft
原材料对冷激铸铁凸轮轴组织和性能的影响 - 26、
Alloying Effect of Vanadium and Titanium in Chilled Cast Iron Roller
钒钛合金冷硬铸铁轧辊试验研究 - 27、
The influences of quench and temper treatment on the microstructure and wear resistance of white layer of the chilled cast iron were discussed.
探讨了淬火及回火热处理对激冷铸铁白口层的显微组织与耐磨性的影响。 - 28、
The results show that Nb can increase the structure stability of chilled cast iron.
结果表明,铌可以有效地提高冷硬铸铁高温组织的稳定性。 - 29、
It is an advanced way by now to manufacture engine camshafts by using low alloy chilled cast iron.
采用低合金冷激铸铁制造发动机凸轮轴是目前比较先进的工艺。 - 30、
The effect of superheat on characteristics of melt iron and microstructure of chilled iron camshaft was studied in a 1 t intermediate frequency induction furnace.
研究了1t中频炉铁液过热对铁液质量和激冷铸铁凸轮轴组织的影响。

