crystalline polymer

crystalline polymer 基本解释

结晶聚合物

化学

重点词汇

• polymern. 聚合物, 聚合体 [化] 多聚体; 高分子; 大分子; 聚合物
• crystallinea. 透明的；水晶般的；水晶制的

crystalline polymer 双语例句

1. 1、 The results showed that the tensile behavior of UHMWPP fiber belongs to crystalline polymer at room temperature low draw ratio, but hard elastic materials at high temperature.
   结果表面：UHMWPP纤维在室温低拉伸倍率下表现为结晶高聚物的拉伸行为，高温时则为硬弹性材料的拉伸行为。
2. 2、 Synthesis of a Side-Chain Liquid crystalline polymer with Cholesteryl as Mesogenic Group Synthesis and mesogenic behavior studies of liquid crystals acrylic acid with spacer
   一种含胆甾醇介晶基团的侧链液晶高分子的合成含柔性间隔基丙烯酸液晶化合物的合成及介晶性研究
3. 3、 The recent development of in situ composites based on blends of a polyetherimide ( PEI) and thermotropic liquid crystalline polymer ( TLCP) was reviewed in this paper.
   综述了近年来聚醚酰亚胺和热致性液晶高分子共混形成原位复合材料的研究进展。
4. 4、 Several modified UHMWPE including liquid crystalline polymer, organ silicon materials, layered silicate that can be processed by common extrusion equipment were introduced.
   介绍几种可用普通挤出设备生产管材的改性超高分子量聚乙烯（UHMWPE），包括液晶聚合物改性、有机硅树脂改性和层状硅酸盐改性等；
5. 5、 Polyamide is classified as a crystalline polymer, but it is only mostly crystalline;
   聚酰胺被划作结晶聚合物，但是它只是结晶最多的聚合物；
6. 6、 Study of Crystalline Morphologes and Kinetics in Miscible Crystalline/ crystalline polymer Blends
   相容性结晶/结晶聚合物共混体系独特结晶形态及结晶动力学的研究
7. 7、 It is difficult to sinter part of crystalline polymer material by SLS for large deformation of crystalline material shrinking in the process.
   结晶性聚合物在SLS成形过程中存在较大的收缩变形，工艺较难控制，但此类材料韧性和强度很好，因此其SLS制造有巨大的发展潜力。
8. 8、 Effect of Gangue Leach Liquor on Lettuce Seeds Germination Synthesis of a Side-Chain Liquid crystalline polymer with Cholesteryl as Mesogenic Group
   煤矸石浸提液对莴笋种子发芽的影响一种含胆甾醇介晶基团的侧链液晶高分子的合成
9. 9、 Texture of a new liquid crystalline polymer& butyryl chitosan was studied using polarized microscopy.
   用偏光显微镜研究了一种新的液晶高分子&丁酸壳聚糖液晶的织构。
10. 10、 Liquid crystalline polymer/ PA1010/ French chalk hybrids were prepared by melt intercalation.
    用液晶聚合物（LCP）作增容剂，采用熔融插层法制备了PA1010/滑石粉（FCP）杂化材料。
11. 11、 Progress in Ferroelectric Liquid crystalline polymer
    铁电性液晶高分子的研究进展
12. 12、 Studies on the synthesis, characterization and properties of the reactive thermotropic liquid crystalline polymer
    反应型热致性液晶聚合物的合成、表征及性能研究
13. 13、 Analysis of crystalline polymer pet and PBT with electron microscope
    结晶高聚物PET和PBT电子显微镜分析
14. 14、 Development of Study on the In-situ Composites of Thermotropic Liquid crystalline polymer Reinforced Thermoplastic Polymer
    热致液晶高分子原位增强热塑性树脂复合材料研究进展
15. 15、 Liquid crystalline polymer has the highest strength and modulus. Nowadays it is well known as super engineering plastics.
    液晶高分子材料具有相当高的强度和模量，被誉为当代超级工程塑料。
16. 16、 Recent studies on cocrystallization behavior of crystalline polymer blends were generally reviewed.
    对发生于结晶聚合物/结晶聚合物共混体系中的共结晶行为的近期研究状况作了综述。
17. 17、 The tensile test and dynamic mechanical analysis ( DMA) were conducted to investigate the mechanical properties of polypropylene/ thermotropic liquid crystalline polymer/ glass fiber ( PP/ TLCP/ GF) hybrid composites with a good TLCP fibrils structure.
    对具有良好液晶聚合物微纤结构的聚丙烯/热致液晶聚合物/玻璃纤维（PP/TLCP/GF）混杂复合材料，使用静态拉伸和动态力学分析（DMA）的方法研究了材料的力学性能。
18. 18、 A staining method with allylamine and Osmium tetroxide for the analysis of crystalline polymer PET and PBT is presented in this paper.
    本文介绍一种用于提高结晶高聚物PET和PBT电子显微图象衬度的丙烯胺四氧化锇染色方法。通过列举的照片，可以直接观察到结晶PET和PBT的两相结构晶区和无定形区。
19. 19、 Study on properties of epoxy resin modified by side chain liquid crystalline polymer
    一种侧链型液晶聚合物与环氧树脂共混改性研究
20. 20、 This article reviews the current methods of toughening modification of cyanate ester resin, including thermoplastics toughening, thermosetting resins toughening, rubber elastomers toughening and thermotropic liquid crystalline polymer toughening. At the s
    综述了目前氰酸酯树脂增韧改性的各种方法，包括热塑性树脂增韧、热固性树脂增韧、橡胶弹性体增韧、热致液晶聚合物增韧等，讨论了改性氰酸酯树脂的应用前景。
21. 21、 Research advance on in-situ composites polypropylene/ thermotropic liquid crystalline polymer
    聚丙烯/热致性液晶聚合物原位复合材料的研究进展
22. 22、 The effects of the drawing ratio and the addition of a compatibilizer on the morphology of dispersed thermotropic liquid crystalline polymer ( TLCP) phase in the PP/ TLCP in-situ composites were studied.
    考察了熔融挤出后施加的牵伸比和增容剂对聚丙烯（PP）/热致液晶聚合物（TLCP）原位复合材料中TLCP分散相形貌的影响。
23. 23、 The progresses of liquid crystalline polymer network are reviewed in this paper.
    综述了液晶聚合物网络的新进展，包括液晶热固体、液晶弹性体和液晶互穿网络。
24. 24、 Mechanical Properties of Polysulfone and Thermotropic Liquid crystalline polymer Composites
    聚砜与热致液晶聚合物共混物的力学性能
25. 25、 A number of important achievements in promoting the toughness of epoxy resin with rubber elastomer, rigid particle, thermoplastic resin, liquid crystalline polymer and core-shell polymer in recent years were reviewed, and its future prospect was also poin
    概述了近年来橡胶弹性体、刚性粒子、热塑性树脂、液晶聚合物及核-壳结构聚合物增韧环氧树脂的研究现状，并展望了环氧树脂增韧改性研究的发展前景。
26. 26、 Some methods of toughening epoxy resin, including those of doing epoxy resin with thermoplastic resin, liquid crystalline polymer, interpenetrating polymer networks and nano-particles are introduced, and their toughening mechanisms and problems in actual
    介绍了环氧树脂增韧的一些方法，包括热塑性树脂增韧、液晶增韧、互穿聚合物网络增韧、纳米粒子增韧；并简要总结和分析了其增韧机理和实际应用中产生的问题。
27. 27、 The methods of modifying the interfacial compatibility between polymer and thermotropic liquid crystalline polymer ( TLCP) and the toughening mechanism of TLCP were described. The influences on reinforcing and toughening of the interfacial interaction bet
    具体介绍了改善聚合物-热液晶聚合物（TLCP）纳米复合材料界面相容性的方法及TLCP的增韧机理、无机纳米粒子与聚合物界面相互作用对增强、增韧效果的影响及纳米粒子的增韧机理。
28. 28、 Studies on the cycling processability of in-situ composite of a thermotropic liquid crystalline polymer polyether sulfone
    热致液晶聚合物与聚醚砜原位复合材料再加工性能的研究
29. 29、 Compatibility of In situ Composites of Polycarbonate/ thermotropic Liquid crystalline polymer with Epoxy Oligomer
    环氧类反应性低聚体对聚碳酸酯/热致液晶聚合物原位复合体系的增容改性研究
30. 30、 Under different thermal histories, crystalline polymer can form different crystalline structure and supermolecular structure.
    结晶高聚物在不同的热历史条件下，可以形成不同的晶体结构，而每种晶体结构对应于不同的链构象，并形成一定的聚集态结构。