blank flange

blank flange 基本解释

盲板；盲法兰；无空凸缘，管口盖板，管口盖凸缘; 缩略词为BF

化学

重点词汇

• flangen. 边缘, 轮缘, 凸缘 vt. 装凸缘
• blankn. 空格, 空白 a. 空白的, 空虚的, 完全的, 无色的 vi. 消失, 成为空白 vt. 使无效, 取消, 封锁 [计] 空白

blank flange 双语例句

1. 1、 Finally, a blank design example is verified by practical rolling of a flange ring.
   通过与实际轧制用法兰毛坯相比较，证明了本文的设计方法是适用的。
2. 2、 Numerous researches have demonstrated that an appropriate variable blank holder force ( VBHF) during punch stroke is an effective technique to suppress the wrinkling for both flange and sidewall and delay the onset of tearing.
   前人大量的研究表明，在拉伸成形的不同行程施加合适的变压边力（VBHF），可有效避免板料成形中起皱和破裂的缺陷。
3. 3、 Deformation Characteristics and Blank Design of Flange Ring in Rolling
   法兰环件轧制变形规律和毛坯设计方法
4. 4、 The method is suitable for calculation of blank of fillet corner flange of motor vehicle odd shaped parts and no trimming operation is necessary after flanging process.
   该方法适合汽车异形件的角部翻边毛坯计算，翻边后无需修边处理。
5. 5、 Apply the finite element method ( FEM) to simulate the drawing process of rectangle case based on pyramidal face blank-holder which in the region of curve edge of blank flange, and contrast its equivalent strain 、 major strain 、 depth of drawing etc.
   用有限元数值模拟的方法，模拟法兰曲边区域采用锥面压料面时，矩形盒的拉深成形过程，并且与平面压料时法兰在等效应变、主应变分布、拉深深度等方面进行了对比分析。
6. 6、 It is pointed out that the coefficient of slip friction in the flange corner is quite sensitive to blank holder force in a forming process, and directly affects the stress and strain state of the flange and the part in danger of fracture.
   指出法兰曲边部的滑动摩擦因数对于成形过程中的压料力相当敏感，并且对法兰部和断裂危险部材料的应力应变状态产生直接影响。
7. 7、 During the experiment using 08A(?) steel sheet as workpieces hydraulic pressure is applied on the blank as blank-holder force and the periphery of the cup flange as radial pushing force.
   采用液压压边与周缘加径向推力的拉深模具对08A（？）
8. 8、 The Optimization of Blank Section in Precision Rolling of Big Caliber Flange
   长径对焊法兰精密辗扩坯料截面形状优化
9. 9、 The technological analysis is conducted, the extruding technology is formulated, the blank dimension and the cold extruding force are calculated for the titanium alloy hexagon locking-nuts with flange.
   对钛合金六角法兰面自锁螺母进行了工艺分析、制订了冷挤压工艺路线、计算了毛坯尺寸及冷挤压力。