welds

welds 基本解释

v.  焊接; 熔接; 锻接; 使紧密结合; 使连成整体
weld的第三人称单数

welds 词组短语

• attachment welds
• temporary welds
• reinforcement butt welds
• annealing welds
• defects in welds
• slag inclusions in welds
• ultrasonic examination of welds
• groove welds

welds 详细解释

1. VERB 焊接;熔接;锻接
   To weld one piece of metal to another means to join them by heating the edges and putting them together so that they cool and harden into one piece.
   1. It's possible to weld stainless steel to ordinary steel...
      不锈钢是有可能和普通钢焊接在一起的。
   2. They will also be used on factory floors to weld things together...
      它们也可用于工厂车间，用来焊接物体。
   3. Where did you learn to weld?
      你在哪儿学会的焊接技术？
2. 焊缝;焊接点
   A weld is a join where two pieces of metal have been welded together.
3. VERB 使紧密结合;使成整体
   If you weld people together, you join them together to form a united organization.
   1. She has both the authority and the personality to weld the party together...
      团结全党所需的权威和个人魅力她两者兼具。
   2. The miracle was that Rose had welded them into a team.
      令人称叹的是罗斯把他们打造成了一个团队。

welds 双语例句

1. 1、 Perform a shop inspection to evaluate the capability of shop procedures and personnel to make acceptable welds.
   进行工厂检验，以评价工厂工艺和人员制备可接受焊缝的能力。
2. 2、 These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.
   这些夹具是必不可少的，以确保最优质的焊接变形和焊接过程中最低。
3. 3、 The use of backing rings for butt welds is prohibited.
   禁止在对接焊缝上使用垫环；
4. 4、 All welds for nozzles and manways shall be full penetration through the vessel wall.
   接管和人孔的焊缝应为穿过容器壁的全熔透。
5. 5、 Latest Development of Fatigue Strength Analysis Technology for welds in Steel Structures
   钢结构焊缝疲劳强度分析技术的最新进展
6. 6、 Hydroformed parts are stronger and weigh less due to structural integrity and fewer welds or add-on pieces.
   内高压成形零件的强化，以及重量更轻，由于结构的完整性和减少焊接或添加件。
7. 7、 Effect of Microstructure on Impact Toughness of High Strength Aluminum Alloy welds
   微观组织对高强铝合金接头冲击韧度的影响
8. 8、 All welds shall be butt welds.
   所有焊缝为对焊焊缝。
9. 9、 Cracks that have developed in the web at lateral connection plates have generally occurred because of intersecting welds.
   腹板在水平连接板处出现裂纹，通常是由于有交叉焊缝。
10. 10、 "Dry Washing" of welds and torch heating of welds for straightening purposes are not permitted.
    不得为了校直而对焊缝进行干洗和火焰加热。
11. 11、 In welded steel structures, fatigue cracks will almost certainly start to grow from welds, rather than other details.
    在钢的焊接结构中，疲劳裂纹几乎肯定从焊缝处开始产生，而不是其他细节处（或部位）。
12. 12、 Assembles, welds and repairs pressure vessels and pipes to relevant standards.
    根据相关标准组装、焊接和维修压力容器及管道。
13. 13、 Cracks have been found in the flange and web splices at groove welds in at least four bridges.
    至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
14. 14、 The applies in the ocean oil gas pipeline construction bevel machine article, the belt copper liner welds and pipeline auto welding machine, welding equipment and welding procedure were introduced.
    介绍了应用于海洋油气管道施工的坡口机、带铜衬垫对口器、全位置自动焊等焊接装备和焊接工艺。
15. 15、 Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.
    对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。
16. 16、 Full penetration butt welds shall be used to join sections of tubes together.
    管节采用满对接焊。
17. 17、 Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.
    在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。
18. 18、 welds containing defects exceeding that amount shall be cutout and replaced.
    应切除并更换含缺陷超过该值的焊缝。
19. 19、 Longitudinal, circumferential and repair welds shall be100% radiographed.
    对纵向、圆周以及修复焊缝进行100%射线透照。
20. 20、 There are many ways to make a weld and many different kinds of welds.
    焊缝制备的方法有很多，也有很多种不同类型的焊缝。
21. 21、 A method about improving the crack resistance of weld metal and reducing structure stress during welding process, i.e.hammering welds and watered rapid cooling after welding, was obtained.
    研究出了提高焊缝金属抗裂性能及降低焊接过程结构内应力的工艺方法&焊后捶击焊逢并浇水快速冷却。
22. 22、 The Contractor shall conduct daily NDE percentage of welds to assess weld quality.
    承包商应进行日常无损检测焊接百分比，以评估焊接质量。
23. 23、 Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
    指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
24. 24、 A welding method that produces welds that are smooth and free of defects such as automatic orbital welding should be employed.
    应使用产生平滑无缺陷的焊缝的焊接方法例如自动轨道焊。
25. 25、 Only apply MIG welds on the side member using the welders approved in the workshop equipment manual.
    只能使用《车间设备手册》中认可的焊机对侧梁执行mig焊接。
26. 26、 All welds shall be full penetration and continuous unless otherwise specified on the drawing.
    除非图上另外标明，所有焊缝均为连续全焊透焊接。
27. 27、 The observed friction force is the force required to break these tiny welds.
    我们观察到的摩擦力，就是破坏这些细微的焊接点所需要的力。
28. 28、 All welds to have full depth penetration.
    所有焊缝必须满焊。