carbon steels

carbon steels 基本解释

网络  碳钢; 碳素钢成分分析标准物质; 碳素钢

化学

重点词汇

• carbonn. 碳, 副本, 复写纸 [化] 碳
• steelsn.钢;钢铁工业;兵器v.准备对付;下决心应付steel的第三人称单数和复数

carbon steels 双语例句

1. 1、 The grind-hardening for two kinds of widely used middle carbon steels were carried out on a surface grinder by creep feed dry grinding, and the characteristics of the hardened layer were studied.
   通过对陶瓷刀具材料磨削机理的分析，探讨了影响陶瓷刀具材料磨削的各种工艺因素，并在此基础上提出采用缓进给成形磨削陶瓷刀具材料的工艺方法。
2. 2、 Other applications where high carbon steels are well suited include drill bushings, locators, and wear pads.
   高碳钢也很适用的其它地方包括钻头夹头、定位仪和耐磨垫。
3. 3、 For surfacing welding or repair the wear out face made by low carbon steels and middle carbon steels, as axle, gear and blade of mixer.
   用于受磨损的低碳钢、中碳钢或低合金钢机件表面，如矿山机械与农业机械的堆焊与修复。
4. 4、 Thermodynamics analysis for the effect of aluminum content on the graphitization in ultrahigh carbon steels
   铝含量对超高碳钢石墨化影响的热力学分析
5. 5、 Fwelding of carbon steels low-alloy steels.
   用于碳素钢及低合金钢的焊接。
6. 6、 Effect of Silicon Content on Microstructure Evolution of Low carbon steels during Continuous Cooling
   硅含量对低碳钢连续冷却中转变组织的影响
7. 7、 High carbon steels are the most hardenable type of carbon steel and are used frequently for parts where wear resistance is an important factor.
   高碳钢是最能被硬化的一种碳钢，常常用于高耐磨性很重要的地方。
8. 8、 Effect of Rare Earths ( Cerium/ Lanthanum) on the Corrosion Behavior of carbon steels in Ocean Atmosphere Studied by Electrochemistry
   【化】镧系（即稀土元素）稀土（Ce/La）对碳素钢耐海洋性大气腐蚀影响的电化学研究
9. 9、 For surfacing welding the wear our face made by low& middle carbon steels and low-alloy steels, such as axle, gear, blade of mixer, main moving wheel.
   堆焊受磨损的中、低碳钢或低合金钢的表面，如车轴、齿轮、搅拌机叶片、行走主动轮等。
10. 10、 Reducing annealing furnace: The furnace is used to anneal and reduce cold rolled carbon steels.
    还原退火炉：炉子用于冷轧低碳钢的还原退火。
11. 11、 The possibility of transverse corner cracking in slab of peritectic carbon steel is greater than that of other carbon steels.
    介绍了影响包晶碳钢角横裂的连铸工艺操作和设备。
12. 12、 The product spectrum ranges from simple carbon steel and low-alloy steels to high-quality carbon steels.
    产品种类范围从简单的碳钢和低合金钢到高质量的碳钢。
13. 13、 On Nucleation and Growth Kinetics of Bainite Transformation of Low and Medium carbon steels; a prefabricated shelter of corrugated iron having a semicircular cross section.
    中低碳钢贝氏体形核长大动力学研究用波状钢制成的有一个半圆的横截面的用预制构件搭成的长方形房屋。
14. 14、 Comparison of different flow stress models for ultra low carbon steels during warm deformation
    超低碳钢低温变形流动应力模型的比较
15. 15、 The following discussion applies principally to the heat treatment of ordinary commercial steels known as plain carbon steels.
    下列讨论主要针对被称为普通碳钢的工业用钢而言。
16. 16、 Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high& carbon steel. lime bright annealed wire
    根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。中性介质中退火的钢丝
17. 17、 The current research situations and obtained achievements in improving the strength of plain carbon steels are described systematically.
    以建筑用钢筋为研究对象，系统介绍了目前对于提高普通碳素钢强度的国内外研究现状和取得的成果。
18. 18、 I know the three ways. By chemical composition, steels are divided into two classes: carbon steels and alloy steels. Both of the two can be subdivided.
    我知道这3种分类方法。按化学成分，钢可以分为两大类：碳素钢和合金钢。这两大类还可再分。
19. 19、 This paper analyzes mainfactors that influence the dephosphorization of medium-high carbon steels in con-verter steelmaking process.
    分析了转炉冶炼中高碳钢条件下影响脱磷的主要因素。
20. 20、 Thermodynamic Analysis of AlN and BN Competitive Precipitation in Low Carbon Steel Comparison of different flow stress models for ultra low carbon steels during warm deformation
    低碳钢中AlN和BN竞相析出热力学分析超低碳钢低温变形流动应力模型的比较
21. 21、 carbon steels exist in three stable crystalline phases.
    碳素钢含有3种稳定的结晶状态。
22. 22、 The natural corrosion data of some carbon steels, stainless steels and non-ferrous metals in fresh water were acqired.
    取得了部分碳钢、不锈钢、有色金属材料在淡水环境中的自然腐蚀数据。
23. 23、 The influence of pre-deformation at medium temperature on the transformed structures of plain carbon steels is investigated.
    研究了中温预变形对亚、过共析钢组织的影响。
24. 24、 The mechanical properties and corrosion resistance of aluminum coated low carbon steels are investigated in this paper.
    研究了热浸铝低碳钢的室温力学性能和耐腐蚀性能。
25. 25、 Morphology and forming mechanism of annealing twin in medium carbon steels have been studied with optical microscope.
    利用光学显微镜对中碳钢退火孪晶的形态及形成机制进行了研究。
26. 26、 The recent development of researches on superplasticity of ultrahigh carbon steels ( UHCS) is reviewed.
    综述了超高碳钢超塑性的研究进展。
27. 27、 This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.
    本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。
28. 28、 Morphology and nature of martensite in medium and high carbon steels
    中、高碳钢中马氏体的形态和本质
29. 29、 Effect of Controlled Cooling Heat Treatment on Microstructure and Properties of Plain carbon steels
    控冷热处理对普通碳钢组织和性能的影响