kinematic

kinematic 基本解释

adj.  运动的；运动学的

kinematic 词性变化

复数：kinematics

kinematic 词组短语

• kinematic to Saybolt universal viscosity
• kinematic to Saybolt-Furol viscosity
• kinematic viscosimeter
• kinematic viscosity
• kinematic face-bow
• kinematic viscosity scale
• inversion of kinematic chain
• kinematic analysis
• kinematic chain
• kinematic link

kinematic 双语例句

1. 1、 The equations of equilibrium and kinematic relations are independent of the type of material.
   平衡方程和运动学关系式是与材料类无关的。
2. 2、 Design and development of a PC based NC system for Parallel kinematic Machine ( PKM) was analyzed.
   分析了并联机床加工中心数控系统的设计。
3. 3、 Microcomputer Aided Design for Six-bar Linkage of Press and kinematic Analysis and Force Analysis of the Linkage
   微机辅助设计压床六杆机构及其运动分析和力分析
4. 4、 kinematic Calibration Method for High-speed Parallel Robot
   高速并联机械人运动学标定方法研究
5. 5、 kinematic characteristics type of the robot end-effector can be generalized four kinematic element units.
   将机器人末端执行器的运动类型概括为四种运动基。
6. 6、 The kinematic synthesis of four-bar linkage with quick return motion and its optimum design
   急回四杆机构的运动综合和优化设计
7. 7、 The method of automatic modeling of kinematic equations of planar linkage with all joint is presented.
   提出了全校链平面连杆机构运动方程的自动建模方法。
8. 8、 Through the kinematic analysis of relevant mechanism and simulating the motion by ADAMS, the design institution can satisfy the design requirement.
   通过对相关机构运动学分析并运用ADAMS对其进行运动仿真，得出该设计机构能够满足设计要求。
9. 9、 The model is also extended to involve the isotropic and kinematic hardening or softening.
   该模型具有考虑各向同性和运动硬化、软化的功能。
10. 10、 The structure of knowledge base for mechanism kinematic schemes, screw theory and dual vector representation are introduced briefly.
    简要介绍了机械运动系统方案设计知识库的结构和螺旋理论及对偶矢量表达。
11. 11、 The kinematic model for the spherical robot was established according to the nonholonomic constraint acting on it.
    根据机器人所受的非完整约束，建立了其运动学模型。
12. 12、 The research of mechanical kinematic scheme design system based on state vector method
    基于状态向量表示法的机械运动方案设计系统的研究
13. 13、 In order to improve the accuracy of the6-THRT parallel manipulator, kinematic calibration is needed.
    为了提高6-THRT型并联机器人的末端位姿精度，需要对其进行运动学标定。
14. 14、 This article introduces the structure and motion principle of BHQ-2, a newly designed spherical mobile robot equipped with two cameras, and discusses its kinematic motion control.
    介绍了一种新型的、带有双摄像头的环境探测球形移动机器人BHQ-2的结构与运动原理，并对其运动控制问题进行了研究。
15. 15、 Research on kinematics and Virtual Prototype kinematic Simulation of 7-Function Underwater Manipulator
    七功能水下机械手运动学及虚拟样机运动仿真的研究
16. 16、 An approach to the inverse kinematic solution for the redundant manipulator used for nuclear reactor repairing was proposed.
    给出了核反应堆检修用冗余机械手的无碰撞运动学求解方法。
17. 17、 Design of an economic-type spray painting robot and kinematic analysis
    一种经济型喷漆机器人设计与运动学分析
18. 18、 Mechanical movement is the subject of theoretical mechanics research, including statics, kinematic and dynamics.
    机械运动是理论力学研究的对象，包括有静力学、运动学和动力学。
19. 19、 Research on kinematic Characteristics and Walking Stability of Passive Biped Robot without Knees
    无膝双足被动机器人的运动特性和稳定性研究
20. 20、 ADAMS planetary gear transmission system based on kinematic simulation analysis
    基于ADAMS的行星齿轮传动系统运动学仿真分析
21. 21、 The kinematic characteristics of chain drives are analyzed, the relationships between the speed and acceleration of the driven sprocket and the centre distance are given.
    本文从运动学及数学角度对链传动进行了分析，给出了从动链轮速度、加速度与中心距之间的关系。
22. 22、 kinematics Simulation of 6-DOF Parallel kinematic Machine Based on MATLAB and ADAMS
    基于MATLAB和ADAMS的六自由度并联运动机床运动学仿真
23. 23、 Based on maximum fatigue life as objective function and associated kinematic constraints have been formulated.
    基于当目标函数及相关运动学制约已经制定时的最大疲劳寿命。
24. 24、 This paper presents a new design method based on NX kinematic analysis, which can be used either for cam traditional design or for inverse design.
    提出了一种适合于凸轮正向和反求设计的基于NX运动分析的凸轮设计方法。
25. 25、 The hobbing process is based on the kinematic of a wheel – endless screw mechanism.
    滚齿的原理是基于运动学上的“轮子和通长螺杆的啮合”机理实现的。
26. 26、 Cosine tooth profile Involute hobbing cutter Modification coefficient CNC milling machine kinematic control;
    余弦齿廓；渐开线滚刀；变位系数；数控铣床；运动控制；
27. 27、 The analysis is based on the kinematic relationships and the expressions of Hertzian parameters within the contact area.
    整个分析过程在接触区内赫兹参数的运动学关系及其表达式的基础上进行。
28. 28、 Research of kinematic Calibration and Error Analysis for Industrial Robot
    工业机器人运动学标定及误差分析研究
29. 29、 This paper calculates the influence of gross error on filter result, and gives an algorithm for detecting and correcting of gross errors in observed values for kinematic positioning.
    文中计算了粗差对滤波结果的影响，并由此建立了动态定位中粗差的探测和修复算法。