brazed

brazed 基本解释

v.  （用锌铜合金）钎接，用黄铜制造
braze的过去分词和过去式

brazed 词组短语

• brazed seam
• brazed vessel
• brazed copper tube
• brazed joint

brazed 双语例句

1. 1、 The changes of morphologies of brazed diamond grit in grinding were observed by using a digital video microscope system.
   通过数字视频采集系统跟踪观察钎焊金刚石砂轮磨削过程中磨粒表面形貌变化。
2. 2、 Current research situation and development of manufacturing vacuum brazed diamond tools
   钎焊金刚石工具制备的研究现状和进展
3. 3、 Application: mainly use to serve as carbide brazed tip of carbide turning tool.
   用途：主要用来作为焊接车刀的刀头。
4. 4、 Sapphire and Nb alloy have been successfully brazed by use of tungsten-metallization technique.
   通过对蓝宝石的钨金属化，实现了蓝宝石与铌合金的高温封接。
5. 5、 Surface graphitization on brazed diamond with Ni-Cr alloy in vacuum brazing
   Ni-Cr合金真空钎焊金刚石的表面石墨化
6. 6、 Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
   钎焊金刚石微观形貌与磨粒磨损状态关系研究
7. 7、 Assemble parts to be brazed.
   对需要进行钎焊的部件进行组装。
8. 8、 Silver Brazing Method: Assemble parts to be brazed.
   银钎焊的方法：对需要进行钎焊的部件进行组装。
9. 9、 Microstructure and properties of Si_3N_4 ceramic joint brazed with rapidly-cooled Ag-Cu-Ti filler metals
   Ag-Cu-Ti急冷钎料钎焊Si3N4陶瓷接头界面结构及性能
10. 10、 The four blades and guide blocks arranged according to the uniform division of a circle are brazed on the cutter body.
    四块刀片和导向块按圆周待分排列钎焊于刀体上。
11. 11、 Don't worry, it only brazed her skin.
    不用担心，她只是擦伤了。
12. 12、 Predicting model for residual stress in brazed stainless steel plate-fin structure based on neural network
    基于神经网络的不锈钢板翅结构钎焊残余应力预测
13. 13、 Signal Feature Analysis and NDT Method of Thin-Walled brazed Weldments with Complex Structure
    复杂薄壁结构钎焊接头超声信号特征与检测方法
14. 14、 brazed Interface Microanalysis of Carbon-fiber Reinforced Composite Material and Titanium Alloy by Brazing Filler Metal Containing Ti Element
    含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析
15. 15、 Local fusion deformation occurred after the product antenna combination was brazed.
    某产品天线组合钎焊后，局部发生熔化变形现象。
16. 16、 The forming reason and solving method of stress-corrosion cracking for brazed joint of Band pipe is studied in this paper and compared with copper-copper pipe joint at the same conditions.
    本文着重研究了邦迪管钎焊接头应力断裂的形成条件以及解决方法，并比较了铜管-铜管钎焊接头在相同条件下应力断裂情况。
17. 17、 Influence of Aging Treatment on Microstructure and Shear Property of Sn-9Zn/ Cu brazed Joint
    时效处理对Sn-9Zn/Cu界面组织及剪切性能的影响
18. 18、 Interface Microstructure and Reaction of SiC/ SiC Joints brazed by Ag-Cu-Ti
    Ag-Cu-Ti连接SiC/SiC接头界面反应和界面结构
19. 19、 Static tensile crack behavior of brazed joints of dissimilar metals tubes in aerospace system
    航天器异种金属钎焊接头静态裂纹行为分析
20. 20、 Effect of Cr on Property of Stainless Steel Joint brazed with Series Ni-P Filler Metal
    Cr对Ni-P系钎料钎焊不锈钢接头性能的影响
21. 21、 Cut through the brazed seam on the connection to the side section with the parting grinder.
    用分离打磨机切断连接到侧面部件的铜焊缝。
22. 22、 brazed all honeycomb sandwich
    铜焊全金属蜂窝夹层结构
23. 23、 The mean protrusion height of diamond grits and grit wear were studied in grinding granite with a brazed diamond wheel.
    研究了钎焊金刚石砂轮在磨削花岗石材料过程中，金刚石磨粒的出刃高度和磨损状态的变化规律。
24. 24、 Spreadability, microstructures and mechanical properties of brazed joints of silver filler metals with different content of gallium were studied.
    研究了不同镓含量银钎料的熔化温度、铺展性能、钎缝力学性能以及钎料的显微组织变化规律。
25. 25、 Openings for connections to brazed vessels
    用于对钎焊容器的连接开孔
26. 26、 The results showed that broken-up, occurred on the combined zone between grit and matrix, was the main wear mechanism for brazed diamond grits.
    钎焊金刚石磨粒的出露高度越高，磨粒所承受的弯矩越大，弯矩增加以及工件对磨粒的剪切力是导致金刚石磨粒产生结合部破碎的主要原因。
27. 27、 The cause of externally applied pipe load to brazed aluminum heat exchanger and the necessity of calculating allowable pipe load are analyzing.
    分析了板翅式换热器封头接管外载荷产生的原因和进行许用接管载荷计算的必要性。
28. 28、 Vacuum brazed diamond graver is used to grave all kinds of stones.
    钎焊雕刻刀用于雕刻各种石头。
29. 29、 Brazing Method: Assemble parts to be brazed.
    银钎焊：需钎焊件组装。