solidification
solidification是什么意思、solidification怎么读
读音：[英]
[美]
solidification 基本解释
网络 凝固; 固化; 硬化; 凝结过程; 凝固作用
solidification 词组短语
- critical solidification rate
- cement solidification
- unidirectional solidification
- solidification temperature
- solidification of radwaste
- plastics solidification
- spray solidification
- temperature of solidification
- directional solidification
- endogenous solidification
solidification 双语例句
- 1、
The research results may also help to improve the fabrication processes of directional turbine blade solidification.
研究结果对于定向凝固涡轮叶片设计、分析方法的完善和成形工艺的改进具有重要意义。 - 2、
In this review, the development of real-time observation method to study the process of metal solidification is introduced.
利用实时观察方法对锗酸铅晶体生长枝蔓晶的生长过程进行了描述和分析。 - 3、
Research progress and the limitation of non-equilibrium effect of rapid solidification and its formation mechanism are analysised.
分析了快速凝固的非平衡效应及形成机制的研究进展，指出了现有理论的局限性。 - 4、
High energy density electron beam is employed in surface rapid solidification on Ni plated Ti alloy.
采用高能量密度电子束进行了钛镀镍合金表面熔凝处理的研究。 - 5、
Effect of Growth Rates and Alloying Elements on the solidification Process of Al-Fe Alloy
生长速度和合金元素对Al-Fe合金凝固过程的影响 - 6、
Chromium residue was treated by solidification process with cement.
采用水泥固化的方法对铬渣进行处理。 - 7、
Directional solidification and single crystal will be the development direction of the casting microstructure simulation.
铸件微观组织模拟研究向定向凝固及单晶方面发展。 - 8、
The effects of the direct magnetic field treatment on the microstructure and electrochemical performances of hydrogen storage alloys during their solidification process were studied.
研究了贮氢合金凝固过程中施加直流磁场处理对其组织结构和电化学性能的影响。 - 9、
Formation mechanism of microporosity is the results of interaction between thermodynamics and solidification mechanism.
微孔不同的组织形态是热力学和凝固机理交互作用的结果。 - 10、
A cellular automaton model was developed to simulate the primary spacing selection of dendritic array during directional solidification.
发展了一个元胞自动机模型来模拟定向凝固中枝晶阵列的一次间距选择。 - 11、
Ultrasonic can greatly refine solidification structure of metals and eliminate gravity segregation.
超声波可以显著细化金属凝固组织，有效消除比重偏析。 - 12、
During the solidification in the mould carbon monoxide is formed and the gas makes the steel boils.
在锭模中凝固的过程中产生的一氧化碳气体使钢液沸腾。 - 13、
The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.
对CY-61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。 - 14、
The mechanism of the effect of current impulse on solidification structure was qualitatively discussed.
定性讨论了电脉冲影响凝固组织的可能作用机理。 - 15、
The effect of pulsed current and pulsed magnetic field on the solidification structures of LY12 aluminum alloy was studied.
在LY12铝合金凝固的过程中施加脉冲电流或脉冲磁场，研究脉冲电流或脉冲磁场对这种合金凝固组织的影响。 - 16、
Numerical simulation based on phase field method is developed to describe polycrystalline solidification for pure material.
基于相场方法对包含多晶粒的纯物质凝固过程进行了数值模拟。 - 17、
The study of the bubble growth is significant to the molding and solidification of foamed plastics.
气泡长大过程的研究对泡沫塑料的成型与定型具有相当重要的意义。 - 18、
A new approach which was zinc alloy solidification under mechanical vibration was proposed.
提出了一种在机械振动条件下锌合金凝固成形的新方法。 - 19、
A kind of pulse power supply was designed which uses in the metal solidification process.
设计了一种金属凝固过程用脉冲电源。 - 20、
The titamium oxide growth model during solidification is established according to the basic rules of segregation and diffusion.
根据凝固过程中溶质元素偏析和扩散的基本规律，建立了凝固过程中氧化钛的长大模型。 - 21、
The peel and the adhesion strength of various solidification fraction of the ETPB were studied.
本文研究ETPB固化剂加入量对粘接和剥离强度的影响。 - 22、
The influence of electropulsing density on solidification structure of ZA12 alloy was studied.
研究了脉冲电流强度对ZA12合金凝固组织的影响。 - 23、
The Effect of Melt Structure Transition on the solidification of Binary Sn-Bi and Sn-Sb Alloys
熔体结构转变对二元Sn-Bi和Sn-Sb合金凝固的影响 - 24、
Based on proportional solidification technology, the feasibility to adopt feederless foundry method for producing the casting was analyzed.
按照均衡凝固技术对该铸件无冒口铸造可行性进行了分析。 - 25、
Effect of electromagnetically continuous casting on solidification structure and property of brass
电磁连铸对黄铜凝固组织和性能的影响 - 26、
The mathematical model of numeric simulation of casting filling and solidification process were studied.
对铸造充型及凝固过程数值模拟的数学模型进行了研究。 - 27、
The solidification period of housing backplane casting has been analyzed.
分析了机架底板铸件凝固补缩过程。 - 28、
Simulating different solidification cooling rate with step-metal mould and sand mould, the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.
利用阶梯型腔金属模和砂型模拟不同的冷却速度，研究了冷却速度对高硼钢凝固组织和性能的影响。 - 29、
A mathematical model depicting the initial solidification of the billet is built up and verified with the experimental data.
建立了描述小方坯初始凝固的三维数学模型，并用实验数据进行了验证。
solidification 英英释义
noun