hot-pressing
hot-pressing是什么意思、hot-pressing怎么读
读音：[hɒt ˈpresɪŋ]
[hɑːt ˈpresɪŋ]
hot-pressing 基本解释
n. 热压；热压机
重点词汇
hot-pressing 双语例句
- 1、
Objective To study the effect of hot-pressing with rehabilitation on hemiplegic shoulder-hand syndrome in stroke patients ( pts).
目的观察中药熨结合康复训练干预脑卒中后肩手综合征的临床效果。 - 2、
Research on the Appropriate Humidity of Molded Pulp Product before hot-pressing
纸浆模塑制品热压整形适宜湿度的研究 - 3、
Research on Mechanical Properties of SiC/ MoSi_2 Composites Prepared by Technology of In-situ Reaction hot-pressing Sintering
原位反应热压烧结SiC/MoSi2复合材料的力学性能研究 - 4、
Influence of sintering additive on the performance of B_4C based composites sintered by reaction hot-pressing
烧结助剂对反应热压烧结B4C基复合材料性能的影响 - 5、
When in hot-pressing edge covering, nitrogen flushing is carried out and instant cooling can be realized.
热压包边时进行氮气冲刷、瞬间冷却。 - 6、
In this paper, the granite polishing abrasive tools are developed and manufactured by hot-pressing, in which powder phenolic resin is used as bond and a few soft materials are used as abrasives.
研制了一种花岗石抛光磨具，该磨具采用粉末酚醛树脂作结合剂和几种软磨料复配混合热压而成。 - 7、
Three-dimensional thermal-chemical-stress numerical model and finite element analysis for hot-pressing process
热压工艺热-化学-应力三维数值模型及有限元分析 - 8、
Technology and characterization of bone tissue engineering scaffold using hot-pressing and particulates leaching process
热压-盐析法制备骨组织工程支架的工艺及性能表征 - 9、
Effects of hot-pressing parameters on vertical density profile of MDF
工艺参数对中密度纤维板断面密度分布的影响 - 10、
Research of Oxidation Resistance of Short Carbon Fiber Reinforced SiC Composite by hot-pressing
短切碳纤维增强碳化硅复合材料的氧化性能研究 - 11、
Improvement of Multilayer Printed Board Quality by Relieving Residual hot-pressing Stress
层压板热压释放残余应力对多层印制板品质的改善 - 12、
Taking modified MF and PF resin as the adhesive and using "cool-hot-cool" technology, this paper designs two groups of technological parameters of hot-pressing to press bamboo curtain plywood.
基于前期对改性三聚氰胺-甲醛树脂（MF）的研究成果，以改性MF为胶黏剂，选取热压温度、单位压力和时间为试验因素，研究竹帘胶合板制造工艺。 - 13、
The Microstructures and Properties of Novel-Type Cu/ Cr_2Nb Contact Materials Fabricated Mechanically Activated hot-pressing
机械活化热压制备新型Cu/Cr2Nb触头材料的组织与性能 - 14、
It was found that higher resin content accelerated heat penetration towards the core However, the resin content didn't significantly affect total hot-pressing time.
同时随着浸胶量的增加板坯传热速度增加，但浸胶量不影响板坯的总热压时间。 - 15、
Influence of improved hot-pressing technology on the quality and stability of pumpkin seed oil
改进热榨工艺对南瓜籽油品质及稳定性的影响 - 16、
Microstructure and properties of nanocrystalline Fe_3Al fabricated by mechanical alloying followed by vacuum hot-pressing
机械合金化及真空热压制备纳米晶Fe3Al的组织及性能 - 17、
The composite sheets were fabricated from cospinning or blend-weaving textiles of modified ramie fibers and polymer in hot-pressing.
本文将改性的苎麻与树脂混纺或混织的织物在热压机上压制成苎麻纤维与树脂的复合板材。 - 18、
The thesis introduces the application in the domain of control temperature on hot-pressing machine.
介绍单片机在电机热压型机温度控制领域的应用。 - 19、
Fiberboard and the Relation between Its Central Layer's Temperature And Mechanical Property during the hot-pressing Process
纤维板热压中心层温度与力学性能的关系 - 20、
From the XRD profiles, we found that the crystallinity decreased and the perfection of the crystal became lower with increasing IEC value and decreasing hot-pressing temperature.
XRD衍射曲线表明随IEC值的增大和成膜温度的降低，膜的结晶度下降，主链结晶的规整性变差。 - 21、
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。 - 22、
The SEM fractographs show that the composite interfacial films between the fibre and the matrix are thickened with the increase of the hot-pressing time or pressures.
此外，断口形貌的SEM观察表明，随保温时间的延长或热压压力的提高，复合材料界面层变厚。 - 23、
The progress of internal-mat conditions during hot-pressing process are summarized, especially on temperature behavior and pressure change within the mat.
该文论述了国内外对人造板热压过程中板坯内部环境变化的研究及结果，重点阐述了板坯内部的温度场和气压变化及规律。 - 24、
Microstructures and Mechanical Properties of Nanocrystalline Fe_3Al Matrix Fabricated by Vacuum hot-pressing
真空热压制备纳米晶Fe3Al及其复合材料的结构和性能 - 25、
High strand integrity fibre Study on Application of DCS in hot-pressing Production Line of MDF
高度集束的原纱纤维集散控制系统在中密度纤维板热压生产线中的应用研究 - 26、
In-situ reaction hot-pressing sintering process of SiC/ MoSi_2 composites
SiC/MoSi2复合材料的原位反应热压烧结工艺 - 27、
Processing and Properties of SiC/ CCTO Ceramic Capacitors by hot-pressing Sintering
热压烧结SiC/CCTO陶瓷电容器的工艺和性能 - 28、
Wheat Straw/ Polyethylene Composites Made by hot-pressing Technology
利用传统热压工艺制造秸秆/聚乙烯复合材料 - 29、
This paper introduces the present state on the hot-pressing equipment for formed coil of middle sized motors and manufacture technology.
阐述了中型电机成型线圈的热压成型工艺，在实验的基础上，研究并设计了中型电机成型线圈热压成型装备。 - 30、
Material model of plywood is established to study change of material property in hot-pressing consolidation process.
建立了胶合板的材料模型，以研究热压固化过程中材料性能的改变。