porous plate 基本解释
网络 多孔板; 孔版
重点词汇
- platen. 碟, 盘子, 盆中物, 金属板, 图版, 金银餐具, 印版, 金属牌(照) vt. 镀金, 电镀, 用金属板固定, 给...装钢板, 为...制印版
- porousa. 多孔的, 有气孔的, 多孔性的, 能渗透的 [医] 多孔的
porous plate 双语例句
- 1、
Experiments with the porous plate exhibit somewhat less scatter in the results.
用多孔板所得的实验结果则显得散布程度小些。 - 2、
A micro bubble generator used for drag reduction comprising a cavity, a connection pipeline, a pressure air power machine and a porous silicon plate is disclosed.
一种减阻用微气泡生成装置,由空腔、连接管道、压气动力机械、多孔硅板等组成。 - 3、
The analysis of the running of cooling equipment porous plate in the boiler of DG480T/ h CFB
密孔板冷渣器在DG480T/hCFB锅炉上的运行分析 - 4、
Study on hydrodynamic performance of porous medium plate
多孔介质固阀塔盘流体力学性能的研究 - 5、
Hall Effects on Hydromagnetic Flow on an Oscillating porous plate
振动的多孔平板上磁流体动力学流动的Hall效应 - 6、
Some operation modes of the porous plate water sublimator used in an EVA space suit thermal control system are discussed.
目的探讨水升华器的关键部件&多孔板的研制方法,并对多孔板的主要物理特性参数进行研究。 - 7、
Influence of porous plate on incident wave
透水板对入射波的影响 - 8、
Experimental research of forced convection heat transfer in sintered porous plate channels
流体在烧结多孔槽道中对流换热的实验研究 - 9、
The Effect of porous plate on Surface Waves
板的透水性对表面波波形的影响 - 10、
Technologies for manufacturin porous titanium plate by loose powder sintering and its properties have been introduced.
介绍了松装烧结多孔钛板的制取工艺及性能。 - 11、
In this work an analysis of steady free convection flow of water at 4C passing a vertical infinite porous plate in a rotating system is considered.
本文研究了旋转系统中4℃的水流经竖立的无穷大多孔板时定常自由对流的分析解。 - 12、
Experimental Investigation on porous plate Water Sublimator under Constant Heat Flux
多孔板水升华器在恒热流条件下的试验研究 - 13、
An Experimental Investigation on porous plate Water Sublimator
多孔板水升华器试验研究 - 14、
Wave Trapping near the Vertical Wall due to a Horizontal Submerged porous plate
水平多孔板导致之近岸陷波 - 15、
A porous plate made of the thin nickel fibre at a low cost was introduced. This plate was applicable to Ni-MH and/ or Ni-Cd battery as positive electrode.
本文介绍一种以低成本超细镍纤维制成的多孔基板在Ni&MH电池正极上的应用。 - 16、
Numerical Simulated Research on porous plate Heat Transference
多孔板换热的数值模拟研究 - 17、
The authors suggested porous plate at the pit bottom, together with slope anchorage net and steel pipe piles to strengthen the foundation.
本文提出了采用粉喷桩多孔板暗撑加固抗隆起技术,与边坡喷锚网、钢管桩联合支护结构相结合。 - 18、
It introduced the processing technology of cold-press sintering moulding used for processing UHMWPE colorful and porous thin plate.
介绍了用冷压烧结成型法加工超高分子量聚乙烯(UHMWPE)彩色多孔薄板的技术。 - 19、
The influence of structural parameters of plastics porous corrugated plate packing on its hydrodynamic performance was investigated in a Φ 300 mm packing tower with air-H 2O system.
在内径为300mm的填料塔中,以空气-水为物系,研究了塑料孔板波纹填料的结构参数对其流体力学性能的影响。 - 20、
The Structure and Properties of a new Infrared Radiation Porous Ceramic Plate Having Composite Layer Used on Gas Stoves
一种新型的具有表面复合层的煤气远红外多孔陶瓷板的结构和性能 - 21、
Thermal conduction effect in a sound resonant absorber with porous metal plate
多孔性金属薄板共振吸声结构中的热传导效应 - 22、
Free Convection Flow of Water at 4 ° C Passing an infinite porous plate with Constant Suction in a Rotating System
在旋转系统中4℃的水流经具有等常负压的无限大多孔板时的自由对流 - 23、
The effect of transpiration cooling on the heat transfer characteristics for flow through a porous plate was experimentally investigated using sintered porous plates made of uniform or non uniform bronze particles with different diameters to develop an ef
为开发有效的热防护技术,分别采用均匀青铜颗粒和不均匀青铜颗粒烧结而成的多孔板作为实验段,对平板发汗冷却进行了实验研究。 - 24、
Experimental and Numerical Investigation of Internal-Flow Resistance Characteristics in Laminate porous plate
多层多孔层板内流阻特性试验与计算方法研究 - 25、
Based on some assumptions of porous plate structure, relevant mathematics models are established, which can be used to predict the operation mode of the sublimator and surface temperature of the heat exchanger.
在对多孔板多孔结构进行简化假设的基础上,建立了相关的数学模型,来预测水升华器的工作模式和换热器表面的温度。 - 26、
Studies on porous plate catalyst containing mixed oxides of heavier rare earth and cobalt for ammonia oxidation ⅰ. reaction performance of plate catalyst
重稀土复合氧化物多孔板状催化剂用于氨氧化制硝酸的研究Ⅰ.板状催化剂的反应性能 - 27、
The results showed that the porous plate catalyst supported on α-Al2O3 had a larger specific surface area and better performance for surface reaction than the pellet and honeycomb catalysts.
结果表明,用α-Al2O3载体制备的多孔板状催化剂与粒状和蜂窝状催化剂相比具有比表面积大,表面反应性能好等特点。 - 28、
Result Hydrophobic coating porous plate could evidently increase the water retention pressure, but also increase pressure drop of gas permeability in varying degrees.
结果憎水涂层多孔板的水滞留能力显著提高,但其渗透压降也不同程度地增加。 - 29、
The optimal parameters are chosen to construct an optimization model after analysis and comparison. Finally, the optimization model is applied to the hole shape design of aluminum alloy porous plate, obtaining a structure that the maximum potential of mat
通过分析比较得到了最合适的参数值来构建优化模型。最后将构建的最优模型应用于铝合金冲孔板的孔形设计,得到了在不同工况下都能使材料发挥最大潜力的结构。 - 30、
The porous metal plate of the system is coated with selective coating which is set up in building roof or south wall. This can use air as a heat transfer medium and maximize the solar energy conversion into heat.
该系统将涂有选择性涂层的多孔金属板设置在建筑屋顶或南墙上,用空气作为传热媒介,能最大化地将太阳能转换成热能。

