blending agents

blending agents 基本解释

【机】掺合剂

机械

重点词汇

• blendingn. 混合, 混合物, 混成 [化] 掺合; 倒圆
• agentsn.(企业、政治等的)代理人，经纪人;(演员、音乐家、运动员、作家等的)代理人;原动力，动因(指对事态起重要作用的人、事物)agent的复数

blending agents 双语例句

1. 1、 I was blending; that's what agents do.
   我搞糊涂了，那是探员该做的。
2. 2、 Some mineral materials can be used as carriers, blending agents and adsorbent of agriculture chemistry.
   一些矿产可作为农药的载体、掺合剂和吸附剂。
3. 3、 The physical blending of different generations of nucleating agents can reduce cost and improve the performance of the agents in applications.
   不同代成核剂的物理复配有利于降低成本，提高应用效果；
4. 4、 High content antibacterial masterbatches were prepared by melt blending ABS and surface-modified inorganic antibacterial agents containing silver with twin screw extruder, and added into ABS to prepare ABS antibacterial plastics.
   先将载银无机抗菌剂进行表面处理，再与ABS混合经双螺杆挤出得到高浓度的抗菌母粒，然后添加到ABS中注塑抗菌塑料试样。
5. 5、 By blending compatibilizer and composite toughening agents and other additives in the basic material of PA6 and PPO, the PA6/ PPO alloy was prepared by using the newest compatible and blending technique.
   采用最新的相容化技术和掺混技术，在尼龙6（PA6）和聚苯醚（PPO）树脂中，加入自制的相容剂、复合增韧剂等，经双螺杆挤出机共混制备出PA6/PPO合金。
6. 6、 Through the three components blending technology of Polypropylene/ elastomer/ HDPE, with the addition of rheological agents, the polypropylene insulation materials for communication cable are manufactured.
   通过聚丙烯/弹性体/高密度聚乙烯三元共混技术，并添加流变剂，研制了通信电缆用聚丙烯绝缘料。
7. 7、 Sisal fiber/ UF composites were made by blending sisal stems treated by alkali, coupling agents and acetic acid with UF resin synthesized by the author and molded at certain temperature.
   采用碱处理、偶联剂处理、醋酸处理等方法，对剑麻柄进行处理，再与自行合成的脲醛树脂（UF）进行捏合、模压，制成剑麻纤维/脲醛树脂共混复合材料。
8. 8、 Technology of blending diluting oil in ultra-deep wellbore of Tahe Oilfield Study on performance of vacuum residue oil-in-water emulsions prepared with viscosity reducing agents
   塔河油田超深井井筒掺稀降粘技术研究减压渣油的水包油乳化降粘
9. 9、 Effects of Silance/ Titanate Double-Component Blending Coupling Agents on Properties of Brucite/ LDPE
   硅烷/钛酸酯复配偶联剂对水镁石粉/LDPE性能影响
10. 10、 A casting resin system which has excellent electrical and temperature-impacting resistance properties is got by blending bisphenol A-based epoxy resin ( E-39D) with curing agent ( METHPA),α-Al_2O_3 fillers and other additive agents.
    利用E-39D双酚A环氧树脂与酸酐固化剂METHPA、α-Al2O3填料及其他添加助剂，经机械共混固化后可得到具有优异电气性能和耐侯性能的灌封体系。
11. 11、 Different blending ratios of IIR/ CIIR, vulcanization systems, carbon blacks and coupling agents have influence on vulcanization behavior of butyl rubber and chlorination butyl rubber blends, which have been investigated.
    研究了影响丁基橡胶/氯化丁基橡胶（IIR/CIIR）共混胶硫化特性的因素，包括并用比、硫化体系、补强剂和硅烷偶联剂。
12. 12、 The study of technology on high damping NR/ ENR Blends showed that the best blending schedule is two rubbers blending before the compounding agents added;
    减震橡胶加工工艺条件研究表明：NR/ENR-44共混物的最佳共混方法是两组分共混后加配合剂的混炼方法；