bang-bang control
bang-bang control是什么意思、bang-bang control怎么读
bang-bang control 基本解释
开关式控制;继电控制
重点词汇
- controln. 控制, 管理, 克制, 控制器, 操纵装置 vt. 控制, 操纵, 抑制 [计] 控制; 控制器
- bangn. 重击, 突然巨响, 刘海 v. 发巨响, 重击 adv. 砰然地, 突然巨响地, 直接地 [计] 撞击符
bang-bang control 双语例句
- 1、
Research on Hydraulic Control of Wheel Pressure Based on bang-bang control
基于bang-bang控制的轮压液压控制系统的研究 - 2、
This paper researches on the theory of direct power control ( DPC) of three-phase PWM rectifier, and adopts a switching table designed especially for the bang-bang control of the active and reactive power.
研究了三相PWM整流器的直接功率控制(DPC)原理,结合一种专门设计的开关表对有功和无功功率进行Bang-Bang控制。 - 3、
The lock-phase theory into airborne radar servo system is presented. When the system has frequency difference is introduced. it uses bang-bang control strategy.
提出将锁相技术应用于机载雷达伺服系统中,并且当系统存在频差时采用Bang-Bang控制,当系统存在相差时采用PID控制,从而最大限度地减少系统滞后等待,改善了系统的低速性能。 - 4、
The optimal trajectory is generated by using bang-bang control.
同时采用Bang-Bang控制规划出时间最优的机器人运动轨迹。 - 5、
Feed-forward control by inverse model of neural network is first employed to mitigate the effect of hysteresis. Thereafter based on PID controller, improved bang-bang control is added in order to further control error.
首先通过神经网络逆模型的前馈控制来削弱回滞带来的影响,然后在PID控制器的基础上,为了进一步控制误差,加上改进的Bang-Bang控制。 - 6、
bang-bang control arithmetic was adopted in software design and two pieces of the high and the low temperature point.
软件设计则采用Bang-Bang控制算法,需高低两个温度设置点。 - 7、
bang-bang control of hydraulic servo system with a microcomputer
液压伺服系统的微机砰&砰控制 - 8、
Field oriented control ( FOC) which is based on rotor flux orientation and current loop control and direct torque control ( DTC) which is based on stator flux orientation and bang-bang control are the two major control methods for high performance inducti
基于转子磁场定向以及内部电流环控制的矢量控制(FOC)和基于定子磁链观测和滞环比较控制器的直接转矩控制(DTC)是目前高性能异步电动机调速系统中的两种主要控制方法。 - 9、
A composed self-adaptive bang-bang control system which consists of bang-bang controller, PID controller, recognition device and reference model is stated. The control system can be used for time-lag objects with unknown parameters or varying timing.
提出由Bang-Bang控制器、PID控制器、辨识装置、参考模型组成的复式自适应Bang-Bang控制系统,可用于参数未知或时变的时滞对象。 - 10、
In order to solve the complex problems of adding the additional constraints of state variables, getting the Bang-Bang curve and determining the optimal path in the application of the bang-bang control theory, an intelligent Bang-Bang predictive control me
为解决Bang-Bang控制原理具体应用中存在的如何纳入状态变量的附加约束条件、开关曲线的求取和最优轨线的确立等复杂问题,提出了一种智能开关预测控制方法。 - 11、
Simultaneously, it analyses the time-optimal attitude control system by means of variable structure control theory, arriving at the design criterion theorem for the system to be able to realize the bang-bang control all the time.
同时,用变结构控制理论对该系统进行分析,得出了该系统始终能实现Bang&Bang控制的设计准则定理。 - 12、
Swing up and Stabilization of an Inverted Pendulum based on bang-bang control
基于Bang-Bang控制的倒立摆系统摆起和镇定 - 13、
The industrial applicability of PC is compared with that of bang-bang control systems and general microcomputers.
在工业环境下,比较PC和继电器系统以及通用微机系统的适用性。 - 14、
In order to compare the control effect of different methods, the authors use bang-bang control method and instantaneous optimal control method to control the sliding structures.
为对比各种控制方法的控制效果,文中还利用Bang-Bang控制和瞬时最优控制算法对滑移隔震结构进行了半主动控制。 - 15、
Compared with a bang-bang control method, more effective control and flexible choice on control target are shown with the present scheme.
与一类bang-bang控制方法相比,本文的方法具有更好的抑制效果和更灵活的抑制目标选择。 - 16、
A Study on Iterative Learning Control Algorithms Based on bang-bang control Theory
基于Bang-Bang控制思想的迭代学习控制算法研究 - 17、
Intelligent Bang-Bang Predictive Control Algorithm Based on bang-bang control
基于Bang-Bang控制的智能开关预测控制算法 - 18、
This paper analyses the properties of the PID adaptive controller which incorporates the bang-bang control and the adaptive control using neural networks.
将Bang-Bang控制与神经网络自适应控制相结合,利用神经元的学习功能构成了自适应PID控制器。 - 19、
This dissertation proposes a advantaged method of TCSC impedance controller which combines the bang-bang control and fuzzy-PID. This controller can settle the contradiction between the celerity and stability in the control process on the whole.
研究了基于模糊PID控制与bang-bang控制相结合的TCSC阻抗控制方法,可解决控制过程中快速性与稳定性之间的矛盾。 - 20、
When the system error is large, the switch control ( bang-bang control) is used to increase rapidity;
所谓双模控制,就是采用开关控制与线性控制相结合的方法.系统处在大偏差状态下,采用砰&砰控制(Bang-BangControl),进行粗定位,其作用在于提高快速性; - 21、
A parameters-self-tuning fuzzy PID control method is put forward, to simulate the brake process of ABS by employing bang-bang control and fuzzy control, the results shows that the fuzzy PID control is better than bang-bang control.
提出了一种参数自整定模糊PID控制算法,并采用了Bang-Bang控制和模糊PID控制分别对汽车ABS进行了仿真,其结果表明:模糊PID控制比Bang-Bang控制可以达到更好的效果。 - 22、
The linear switching equation for bang-bang control of the double integrating system with a time delay circuit.
具有时滞的双积分系统bang-bang控制的开关线方程。 - 23、
For nonlinear attitude system of flying vehicle with pure time-delay, inertia and bang-bang control a control method using decoupling variable structure is given.
对于具有纯延迟、惯性和由开关控制的非线性飞行器姿态系统,本文提出了采用解耦变结构控制的方法。 - 24、
A two-stage strategy controlling static compensator, consisting of nonlinear bang-bang control and linear regulation, is proposed. The early stage is capable of damping the oscillation most quickly, while the later will ensure that the system smoothly rea
建议对静止补偿器采用非线性开关控制和线性调节相结合的两阶段控制策略,前者可最快地消除系统的大范围振荡,后者则保证系统平稳地进入新的稳态。 - 25、
The traditional DTC is working in the bang-bang control, this simple motor control method has rapid response and strong robustness, meanwhile contain some problems as torque ripple.
但是传统的直接转矩控制方法中采用的是砰砰控制,这种简单的控制方式在保证电机快速响应、强鲁棒性的同时却给电机带来了转矩等各方面的一系列脉动。 - 26、
Input trajectory design method and bang-bang control strategy are combined with the PID closed-loop system respectively. Time optimum nanometer positioning is realized without overshoot.
通过将轨迹规划思想和Bang-Bang控制理论与PID闭环系统结合起来,针对滚珠丝杠定位系统设计变结构控制来消除饱和导致的超调现象,实现了时间最优的无超调纳米定位。 - 27、
And then, aimed at the acute change between the control inputs in the traditional bang-bang control, a method based on the smooth Bang-Bang is proposed. The scope of control inputs is decreased using this method.
然后,针对传统Bang-Bang控制下,控制输入的剧烈变化对系统造成的不利影响,又提出了一种柔化Bang-Bang控制设计方法,这种方法减小了Bang-Bang控制输入的变化幅度。 - 28、
The method integrates with the advantages of both bang-bang control and PID control, which not only guarantees fast control effect, but also removes steady error. 4.
该方法结合了Bang-Bang控制和PID控制方法的优点,即保证了快速的控制效果,又有效地消除了稳态余差。 - 29、
And the neutral-point balancing bang-bang control scheme of three-level PWM rectifiers is proposed.
本文在阐述三电平PWM整流器直接电流控制系统设计方法的基础上,提出了三电平PWM整流器的中点电位平衡Bang-Bang控制方法。 - 30、
Hereafter, by the bang-bang control on flux and torque, design the direct torque control of induction motor control system.
随后通过对磁链和转矩进行控制,设计了感应电机直接转矩控制系统。

