plasma metallurgy

plasma metallurgy 基本解释

网络  等离子体冶金; 等离子冶金

化学

重点词汇

• metallurgyn. 冶金学, 冶金术 [化] 冶金
• plasman. 血浆, 淋巴液, 原生质, 等离子体 [化] 等离体; 等离子体

plasma metallurgy 双语例句

1. 1、 By the discussion of the thermal cycle characteristic of plasma beam surface metallurgy and metallurgical process, the heat-affected zone of the steel matrix was studied.
   通过对等离子束表面冶金热循环的特点和冶金过程的探讨，对钢基体热影响区进行了测试分析，并将热影响区划分为过热区、完全相变区和不完全相变区。
2. 2、 Research on the Production of Iron-based Gradient Alloy Coating Using Plasma Jet Surface Metallurgy
   等离子束表面冶金制备铁基梯度涂层的研究
3. 3、 Filming-Technology of Plasma Chemistry in Powder Metallurgy Products
   等离子体化学镀膜技术在粉末冶金行业的应用
4. 4、 This article introduces processing of plasma chemistry and application of sputter coating and plasma-enhanced chemical vapor deposition in powder metallurgy especially.
   介绍了等离子体化学工艺，特别着重介绍了溅射镀膜与等离子体化学气相沉积在粉末冶金中的应用。
5. 5、 Carbide cutter with high strength and toughness produced by plasma gradient metallurgy technology
   等离子梯度冶金碳化物高强韧截齿刀头
6. 6、 Application of Variance Analysis to Plasma Surface Metallurgy
   方差分析在等离子表面冶金中的应用
7. 7、 A plasma torch for CVD and surface metallurgy
   适用于CVD及表面冶金的等离子喷炬
8. 8、 Because of the outstanding quality, high efficient, low cost, and the wide raw material sources, plasma jet surface metallurgy will has a potential in market competition.
   由于等离子束表面冶金技术具有突出的优质高效低成本综合优势，且涂层原料来源广，在市场竞争中具有潜力。
9. 9、 Effect of Rare Earth on Cracking Resistance of Coating Formed by Plasma Jet Surface Metallurgy
   稀土对等离子束表面冶金涂层抗裂性的影响
10. 10、 The application of the induced magnetic field in surface plasma jet metallurgy, from the influences of freezing morphology, purification and phase transformation were summarized.
    论述了磁场对凝固组织，净化以及相变的影响，分析了自感生磁场在等离子束表面冶金中的作用。
11. 11、 The design of plasma torch, which is the center part of surface metallurgy equipment by plasma-jet, the selection of alloying powder and processing parameter are analysed in the paper. And the application of this technique also is studied.
    系统地分析和探讨了等离子束表面冶金设备的核心部件等离子炬的设计、表面冶金的合金材料的选择、表面冶金工艺的确定。
12. 12、 Effect of Induced Electromagnetic Field in Surface Plasma Jet Metallurgy
    等离子束表面冶金中感生磁场的影响
13. 13、 Plasma Jet Surface Metallurgy and Laser Cladding
    等离子束表面冶金与激光熔覆技术
14. 14、 A Control Circuit Generated DC Glow Plasma in Metallurgy Melt
    在冶金熔体中产生直流辉光等离子体的控制电路
15. 15、 Study on Composite by plasma metallurgy
    等离子束冶金复合材料研究与应用
16. 16、 Plasma techniques and molybdenum metallurgy
    等离子技术与钼冶金
17. 17、 The Application of Plasma In Metallurgy
    等离子技术在冶金中的应用
18. 18、 Theory and Progress of plasma metallurgy
    等离子冶金理论与进展
19. 19、 Research and Application on Wear Resistance Material by Plasma Surface Metallurgy
    等离子表面冶金耐磨材料的研究及应用
20. 20、 As a widely utilized thermal spray technology, arc plasma spraying technique has been adopted in many industrial fields, such as chemical engineering, metallurgy, mechanical engineering, space-navigation et al.
    电弧等离子体喷涂技术是工业上应用极为广泛的热喷涂技术，目前已经在世界范围内大量应用于化工、冶金、机械、宇航等众多工业部门。
21. 21、 In the thermal plasma field arc included basic processes and modelling, diagnostics, plasma systems, melting and evaporation, metallurgy, chemical synthesis, and pyrolysis.
    热等离子体方面包括基本过程和模型，诊断，等离子体系统，熔化和气化，冶金，化工过程和热解。
22. 22、 Study on plasma surface metallurgy Mo-Cr alloy layer of mild steel
    低碳钢等离子表面冶金Mo-Cr合金层的研究
23. 23、 New Development of Double Glow Plasma Surface Metallurgy Technology
    双辉等离子表面冶金技术的新进展
24. 24、 And, some preparation methods of FGM and their applications are dealt with, including spark plasma sinter technology, powder metallurgy method and plasma structure craftwork.
    并综述了功能梯度材料目前常采用的一些制备方法及使用情况，包括火花等离子烧结技术、粉末冶金法、离子结构工艺等。
25. 25、 The in situ particle reinforced Fe-matrix composite coating on a low carbon steel was prepared by plasma jet surface metallurgy using Fe, C, W, Cr, Al alloy powders.
    采用等离子束表面冶金技术，在Fe、C合金粉末中添加强碳化物形成元素W、Cr和少量的Al，在低碳钢基体上制备出原位析出的颗粒增强铁基复合涂层。
26. 26、 Process Study of the Hollow Cathode Plasma Sintering for Powder Metallurgy Goods
    空心阴极烧结粉末冶金制品工艺研究
27. 27、 Cr. Ni in the layer have been investigated in the paper. The results also show that the technigue of the ion infiltrated metals with cathode electric arc is a new technique of metal plasma surface metallurgy and a development for multi-arc ion plating.
    结果表明阴极电弧源离子渗金属技术是新的金属等离子体表面合金化技术，是对多弧离子镀的发展。
28. 28、 The composite of low-carbon and low-alloy steel and high-alloy steel, is manufactured successfully by the plasma metallurgy.
    研究了用等离子束冶金法制备复合材料的方法，成功制备了低碳低合金钢与高合金钢的复合材料。
29. 29、 Plasma arc is widely applied in many technical fields, such as metallurgy, cutting and welding, electric propulsion and so on.
    等离子弧已广泛应用于冶金、焊接与切割、电推进技术等领域。
30. 30、 WC-based composite material was successfully fabricated by plasma in-situ metallurgy to break through the bottleneck of powder metallurgy cemented carbide in this paper.
    为突破粉末冶金硬质合金技术瓶颈，本文采用等离子原位冶金技术制备碳化钨复合材料。