clad plate
clad plate是什么意思、clad plate怎么读
读音：[klæd pleɪt]
[klæd pleɪt]
clad plate 基本解释
网络 复合板; 复合钢板
重点词汇
- platen. 碟, 盘子, 盆中物, 金属板, 图版, 金银餐具, 印版, 金属牌(照) vt. 镀金, 电镀, 用金属板固定, 给...装钢板, 为...制印版
- cladvt. 在金属外包上另一种金属 a. 包层金属的 clothe的过去式和过去分词
clad plate 双语例句
- 1、
Research on the Electric Conductivity and Interfacial Thermal Stability of Cu/ Al clad plate; Numerical simulation and experimental investigation on rolling behaviors of copper cladding aluminum flat wires
铜铝复合母线排的电学性能及界面稳定性的研究铜包铝复合扁线轧制变形行为的数值模拟与实验研究 - 2、
The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.
通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析，提出不等厚度布药的新工艺。 - 3、
Cause Analysis of Weld Crack on 20R+ 410S clad plate Head and Its Repair Technology
20R+410S复合板封头焊缝裂纹原因分析及修复工艺 - 4、
Pitting Corrosion Behavior of Explosive clad plate of TA2/ 316L
TA2/316L爆炸复合板的点蚀行为 - 5、
Hot Rolling and Properties of 304/ 440/ 304 Stainless Steels clad plate for Knife Products
刀具用304/440/304不锈钢复合板的热轧和性能 - 6、
This kind of defect can be eliminated by amending parameters of explosive welding and increased the rate of final products of big and thick stainless steel clad plate.
通过修正爆炸焊接参数，消除了此类缺陷，提高了中厚不锈钢复合板的爆炸焊接成品率。 - 7、
The welding parameters of base plate and clad plate refer to those of the same base material and clad material respectively.
基层的焊接工艺参数按同种基层材料焊接的工艺参数确定。 - 8、
Austenitic stainless steel including clad plate shall generally be subjected to cold forming.
奥氏体不锈钢包括包装板通常使用冷成型。 - 9、
A study of the interfacial microstructure of Al/ Sn clad plate manufactured by mechanical vibration
Al/Sn覆板机械振动复合界面的显微组织研究 - 10、
Butt-jointed Seam Saddle Welding for clad plate of Low Content Alloy and Heat-Resistant Steel& Major Diameter Thick-walled Tube
低合金耐热钢复合板与大直径厚壁接管马鞍形对接焊 - 11、
The main manufacturing processes for clad plate of stainless steel are presented, of which the advantages and disadvantages are analyzed in this paper.
叙述了目前不锈钢复合板生产的主要工艺，分析了各种工艺的优缺点。 - 12、
Effect of segregating materials on surface quality and bonding strength of Ti-steel clad plate
隔离材料对钛-钢复合板表面质量及结合强度的影响 - 13、
When explosive welding the big and thick stainless steel clad plate, there are some quality defects of small area melding in interface appeared random.
爆炸焊接中厚不锈钢复合板时，板面容易随机产生小面积的界面熔化缺陷。 - 14、
Development of Manufacturing Technology for clad plate of Stainless Steel
不锈钢复合板制备技术的发展 - 15、
Interfacial Structure and Performance of Stainless clad plate
不锈钢复合板的界面组织结构与性能 - 16、
The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence.
对不锈钢复合钢板的焊接特点进行了理论分析，总结出其焊接三要素：焊接坡口、焊接材料和参数、焊接顺序。 - 17、
The current development condition of process of metal clad plate is introduced, and the advantages and disadvantages of some processes are analyzed in this paper.
介绍了目前金属复合板生产方法的发展现状，分析了各种生产方法的优缺点。 - 18、
An Analysis on Structure of Bonded Zone of Stainless Steel-Steel Explosive clad plate
不锈钢-钢爆炸复合板结合区组织的分析 - 19、
A study of the fracture behaviour of b30/ qts clad plate welded joints
B30/QTS爆炸复合板焊接接头断裂行为的研究 - 20、
New Process for Fabricating Stainless Steel clad plate and marketing Prospect
不锈钢复合板制作新工艺及市场前景的研究 - 21、
Based on all kinds of existing produce methods of clad plate, This paper made a research of produce Al clad plate by the method of changing surface shape of steel plate.
本论文在现有的各种复合钢板制备方法基础上，采用改变钢板表面形态方法进行了制备包Al复合钢板的实验研究。 - 22、
In this article defect occurring reason was analyzed and hold that the defect was caused by the special welding structure of the stainless steel clad plate and fabrication process.
文中对缺陷产生的原因进行了分析，认为缺陷系不锈钢复合钢特殊的焊接结构和制造工艺所致。 - 23、
Welding Process Characteristic of Titanium Steel clad plate for Internal Cylinder
钢内筒钛钢复合板焊接工艺特点 - 24、
Application on ceramic backing and flux-cored wire in welding thick-wall clad plate
陶瓷衬垫和药芯焊丝在焊接厚壁复合钢板中的应用 - 25、
Research on the interface structures of explosive clad plate and rolled clad plate
爆炸复合板与轧制复合板界面结构的研究 - 26、
The Cu/ Al cold rolling composite technique, the treatment before and after the cold rolling composite and the influence parameters of cold rolling and heat-treatment to the electric and mechanical properties of clad plate have been studied systematically
利用冷轧复合技术系统地研究了铜铝复合冷轧工艺、复合轧制前后处理工艺、复合轧制和热处理工艺参数对复合板力学和电性能的影响； - 27、
Failure Analysis of Spherical Digesters and Development of Spherical Digesters Made of Stainless Steel clad plate
造纸蒸球失效分析和不锈钢复合板蒸球的研制 - 28、
In this paper, the heating temperature and rolling reduction ratio experiments are used to study the factors that rolling technology on the microstructure and mechanical properties of stainless steel/ carbon clad plate.
采用了加热温度和轧制压下率实验来研究轧制工艺对真空复合轧制不锈钢/碳钢复合板微观组织和力学性能的影响。